Darimo Carbon components, when Spain beats Germany
Moderator: robbosmans
I just wrapped the battery in a couple of dense foam rings and plugged it into the seatpost.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
I use https://eu.ritcheylogic.com/eu_en/bike/ ... bber-mountJimmyrn85 wrote:Hi guys, I have a 25.4mm Darimo seatpost for my 2016 Supersix, what is the best way to securely mount my Di2 battery in this seatpost please? Cable tie around bubble wrap squashed in?
Cost 6€ and works (to be complete I only insert it 2cm, then friction is too high so I could trim it cutting half).
Envoyé de mon iPhone en utilisant Tapatalk
you see the same seat post as me?
T2 15mm set back seat post there.... no logo of course.
202857374_10159925422934131_6051833426474462602_n by Thomas Skubiszewski, sur Flickr
T2 15mm set back seat post there.... no logo of course.
202857374_10159925422934131_6051833426474462602_n by Thomas Skubiszewski, sur Flickr
Enjoy your time under the sun.. and when its cold and dark don't worry too much, the world will keep spinning and your time in the sun will come again.
Yeah, 3Nm but I used a drop of loctite 242 on both screws.
Rikulau V9 DB Custom < BMC TM02 < Litespeed T1sl Disc < Giant Propel Advanced SL Disc 1 < Propel Adv < TCR Adv SL Disc < KTM Revelator Sky < CAAD 12 Disc < Domane S Disc < Alize < CAAD 10
Finally decided to purchase darimo products.
Just received my ellipse handlebar however I've got this nick / indentation. Totally unexpected for a premium product.
Darimo told me it's safe to ride.
What are your thoughts guys?
Just received my ellipse handlebar however I've got this nick / indentation. Totally unexpected for a premium product.
Darimo told me it's safe to ride.
What are your thoughts guys?
- wheelsONfire
- Posts: 6283
- Joined: Mon Jul 07, 2014 8:15 am
- Location: NorthEU
It's probably as he says, question is if you accept a new bar with this? I wouldn't!
Bikes:
Ax Lightness Vial EVO Race (2019.01.03)
Open *UP* (2016.04.14)
Paduano Racing Fidia (kind of shelved)
Ex bike; Vial EVO D, Vial EVO Ultra, Scott Foil, Paduano ti bike.
Ax Lightness Vial EVO Race (2019.01.03)
Open *UP* (2016.04.14)
Paduano Racing Fidia (kind of shelved)
Ex bike; Vial EVO D, Vial EVO Ultra, Scott Foil, Paduano ti bike.
glossy ud finish of darimo products has its quirks unfortunately - mine have simillar inperfections but i live with that as it is a penalty that you pay for the low weight. It is still better that a flaky glossy coat on thm clavicula se that started to fall off after approx 1kkm. For me it is a lesson learned if you want lowest weight carbon parts - go for a matte ones
If the bar tape covers the imperfection i wouldn't worry about it, but if not i would send them back as it would drive me mad looking at it every time I went for a ride.exctasy wrote:Finally decided to purchase darimo products.
Just received my ellipse handlebar however I've got this nick / indentation. Totally unexpected for a premium product.
Darimo told me it's safe to ride.
What are your thoughts guys?
Sent from my SM-G986B using Tapatalk
Well spotted! Weight still matters... need something to offset the added weigh of the SRM crankset and disc brakestskubi wrote: ↑Wed Jun 23, 2021 9:33 amyou see the same seat post as me?
T2 15mm set back seat post there.... no logo of course.
202857374_10159925422934131_6051833426474462602_n by Thomas Skubiszewski, sur Flickr
Hey guys.
I've changed my Berk round rail saddle to oval now I can't get the Dyneema loops over the barrels on my Darimo post.
Has anyone else encountered this problem. Obviously the rails are now 2mm bigger as its oval but i would have assumed both saddles would have worked with the loops.
Darimo has said he will make some for me but asked how much longer I want them.
Would you say an extra 5mm would be ok.
Cheers.
Sent from my SM-G986B using Tapatalk
I've changed my Berk round rail saddle to oval now I can't get the Dyneema loops over the barrels on my Darimo post.
Has anyone else encountered this problem. Obviously the rails are now 2mm bigger as its oval but i would have assumed both saddles would have worked with the loops.
Darimo has said he will make some for me but asked how much longer I want them.
Would you say an extra 5mm would be ok.
Cheers.
Sent from my SM-G986B using Tapatalk
Can you show some photos? I never had any rope length issues with T1 and tall rail saddles, Saevid Alien or Lupina.
I installed a Darimo seatpost with Dyneema loops last week.
I also have a Berk with oval rails, and I managed to install it without issues.
I used the rubber bands to aid the installation.
I also have a Berk with oval rails, and I managed to install it without issues.
I used the rubber bands to aid the installation.
I had no problem installing the round saddle and used the bands as per instructions but just couldn't pull the Dyneema over the barrel.
Dont think i made a mistake as I've installed the old saddle quite a few times but I'll certainly try again tomorrow just to double check things.
Thanks for the replies.
Sent from my SM-G986B using Tapatalk
Dont think i made a mistake as I've installed the old saddle quite a few times but I'll certainly try again tomorrow just to double check things.
Thanks for the replies.
Sent from my SM-G986B using Tapatalk
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com