Quarq Magnet kit

Discuss light weight issues concerning road bikes & parts.
Post Reply
AJS914
Posts: 2460
Joined: Tue Jan 28, 2014 6:52 pm

by AJS914

I picked up a Quarq Riken crankset to get started with a crank based power meter. Looking online, I find the Quarq magnet kit only at the Quarq store ($25 + $15 shipping / $40) or at a few places in the UK which make shipping totally impractical.

Is this not a commonly carried part since the new Quarq cranksets don't use a magnet?

Can I just use any magnet as $40 seems a bit steep? What are other retrofit options?

The bottom bracket will be BSA on my Colnago C59.

by Weenie


simoncx
Posts: 105
Joined: Sun Nov 15, 2009 12:27 am

by simoncx

I did the update on my elsa cranks and they don't need a magnet, should be the same on your riken. Before that I had a magnet glued on the chainstay, any magnet will do as long as you set it up along the lines where it shows on the crank.

AJS914
Posts: 2460
Joined: Tue Jan 28, 2014 6:52 pm

by AJS914

Thanks, I’ll check on updating it.

glepore
Posts: 1164
Joined: Thu Mar 28, 2013 4:42 pm
Location: Virginia USA

by glepore

Quarq eliminated the magnet requirement for Riken and Elsa in 2014 with an update-you can use the free Qualvin legacy windows program to update. I suspect that most units out in the field these days have had it done at some point.
Cysco Ti custom Campy SR mechanical (6.9);Cannondale SS Evo Di2 7970 (5.79); Willier Cento Uno Air Di2 9070 (7.0); C40 Mk2 DA 7800 ; Anvil Custom steel Etap;1996 Colnago Technos Record

Post Reply
  • Similar Topics
    Replies
    Views
    Last post