Miche 110 chainring vs Dura Ace?

Discuss light weight issues concerning road bikes & parts.
Post Reply
User avatar
itsacarr
Posts: 736
Joined: Fri Nov 14, 2008 4:55 am
Contact:

by itsacarr

Anyone have any experience with Miche chainrings for Shimano 110 boot pattern? Shift quality, weight, anything? For non Shimano crank.

Ritxis
Posts: 237
Joined: Fri Jun 01, 2012 3:00 pm
Location: San Sebastian

by Ritxis

Miche No, but in Crankset 9000 I have used Specialites TA X110, and I have not noticed differences with the original Shimano
Attachments
IMG_20170505_101325145.jpg


bilwit
Posts: 662
Joined: Sun Apr 03, 2016 5:49 am
Location: Seattle, WA

by bilwit

Ritxis wrote:
Fri Apr 20, 2018 7:59 pm
Miche No, but in Crankset 9000 I have used Specialites TA X110, and I have not noticed differences with the original Shimano
what is the reasoning behind using aftermarket rings? from what I've read these ones are slightly heavier :noidea:

Ritxis
Posts: 237
Joined: Fri Jun 01, 2012 3:00 pm
Location: San Sebastian

by Ritxis

bilwit wrote:
Sat Apr 21, 2018 12:50 am
Ritxis wrote:
Fri Apr 20, 2018 7:59 pm
Miche No, but in Crankset 9000 I have used Specialites TA X110, and I have not noticed differences with the original Shimano
what is the reasoning behind using aftermarket rings? from what I've read these ones are slightly heavier :noidea:
I bought the crankset without rings......the original Shimano rings, rather more expensive and somewhat heavier......Aesthetically, the black TA with the silver of the cranks, is nice.....the trims are not so much, adapting some Rotor trims, it would be perfect
Rotor-Crank-Covers-Kettenblattschrauben-Abdeckung-Shimano-Dura-Ace-9000-37867-0-1481257526.jpeg

alcatraz
Posts: 930
Joined: Mon Aug 29, 2016 11:19 am

by alcatraz

If I had a shimano crank without rings I'd probably get rotor q-rings. They are interesting and help to increase the cranks value.

Of course original rings would look the best and weigh less. If too expensive then q-rings or qxl.

Of course it's up to the OP to decide. Just brainstorming here...

/a

bm0p700f
in the industry
Posts: 3665
Joined: Sat May 12, 2012 7:25 pm
Location: Glermsford, Suffolk U.K
Contact:

by bm0p700f

Miche part are generally well made. I use slot of miche parts in the shop and have no problems. Not tried these rings though.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post