Rotor Aldhu

[handler]

Unfortunately, that won’t work. I tried it, but the spider is designed for rotor rings, and the DA chainrings are too big for it. You’ll need to order a spider from Stone or somewhere similar. I have a spare one that I don’t use, so I could sell it to you.

[Besenwagen]

Unfortunately, that won’t work. I tried it, but the spider is designed for rotor rings, and the DA chainrings are too big for it. You’ll need to order a spider from Stone or somewhere similar. I have a spare one that I don’t use, so I could sell it to you.

I am using this very combination since 13 tkm - no issues at all. Works and shifts flawlessly although my spider is a Sigeyi PM.

Better pictures tomorrow if needed

[fortyonethirty]

A bit of a specific question which I haven't been able to answer via google.

Current setup:
T47 inbound bottom bracket
Vegast cranks
Rotor direct mount 48/32 chainrings
Rotor 30mm gravel spindle (have a road spindle in the garage but I couldn't get it to work and spin freely. Although technically it should)

Need (/want!):
Would like to add a cheap, reliable, non-pedal based PM.

This seems to be the Sigeyi or Magene. (P2M too expensive, Rotor PM don't get good reviews).

Questions/Considerations:
1. I'd need to get a 48/31 GRX ring combo from rotor. Will the Sigeyi or Magene work with the 31 ring? Also, I don't need a Rotor spider if I'm getting a chain ring PM right?
2. Sigeyi/Magene say that it won't work with some (/all?) t47 inbound BB, but as I understand that's a spacing issue. Given I have the gravel spindle, shouldn't this give me the extra clearance I need for the PM? Does anyone run this setup?

[fortyonethirty]

Double post.

[oldmac]

A bit of a specific question which I haven't been able to answer via google.

Current setup:
T47 inbound bottom bracket
Vegast cranks
Rotor direct mount 48/32 chainrings
Rotor 30mm gravel spindle (have a road spindle in the garage but I couldn't get it to work and spin freely. Although technically it should)

Need (/want!):
Would like to add a cheap, reliable, non-pedal based PM.

This seems to be the Sigeyi or Magene. (P2M too expensive, Rotor PM don't get good reviews).

Questions/Considerations:
1. I'd need to get a 48/31 GRX ring combo from rotor. Will the Sigeyi or Magene work with the 31 ring? Also, I don't need a Rotor spider if I'm getting a chain ring PM right?
2. Sigeyi/Magene say that it won't work with some (/all?) t47 inbound BB, but as I understand that's a spacing issue. Given I have the gravel spindle, shouldn't this give me the extra clearance I need for the PM? Does anyone run this setup?

The Sigeyi or Magene power meter spider is not compatible with SHIMANO GRX chainrings.
The SHIMANO GRX 2X chairnings has two sets of chainrings hole. 110BCD for big chainrings and 80BCD for small chairnings.
https://bike.shimano.com/products/compo ... 820-2.html
Sigeyi or Magene power meter spider does not have 80BCD chainrigns hole for the small chainrings.
And the position of GRX 110BCD chainrings hole is different to normal SHIMANO road chairnrings.
So, the 1X GRX chairnrings is not able to be used on normal 110BCD road spiders.
If you want to use SHIMANO GRX chairnings on power meter spider, P2M is your only choice on the world.

[fortyonethirty]

A bit of a specific question which I haven't been able to answer via google.

Current setup:
T47 inbound bottom bracket
Vegast cranks
Rotor direct mount 48/32 chainrings
Rotor 30mm gravel spindle (have a road spindle in the garage but I couldn't get it to work and spin freely. Although technically it should)

Need (/want!):
Would like to add a cheap, reliable, non-pedal based PM.

This seems to be the Sigeyi or Magene. (P2M too expensive, Rotor PM don't get good reviews).

Questions/Considerations:
1. I'd need to get a 48/31 GRX ring combo from rotor. Will the Sigeyi or Magene work with the 31 ring? Also, I don't need a Rotor spider if I'm getting a chain ring PM right?
2. Sigeyi/Magene say that it won't work with some (/all?) t47 inbound BB, but as I understand that's a spacing issue. Given I have the gravel spindle, shouldn't this give me the extra clearance I need for the PM? Does anyone run this setup?

The Sigeyi or Magene power meter spider is not compatible with SHIMANO GRX chainrings.
The SHIMANO GRX 2X chairnings has two sets of chainrings hole. 110BCD for big chainrings and 80BCD for small chairnings.
https://bike.shimano.com/products/compo ... 820-2.html
Sigeyi or Magene power meter spider does not have 80BCD chainrigns hole for the small chainrings.
And the position of GRX 110BCD chainrings hole is different to normal SHIMANO road chairnrings.
So, the 1X GRX chairnrings is not able to be used on normal 110BCD road spiders.
If you want to use SHIMANO GRX chairnings on power meter spider, P2M is your only choice on the world.

That's super helpful to understand the reasoning for this. Appreciate it.

If I go with Rotor 50/34 rings. Do you know if Sigeyi/Megene will work re: the spacing questions I had?