Well after many months of research and thanks to the surprise C64 launch, I got a C60 on sale.
Only 2 dealers have C60s left in Hong Kong with not many sizes.
Very basic thread, haven't even built it yet or weighed it.
Current setup is only a Quarq Dfour91 powermeter with DA 50/34 rings.
BB=Sram GXP (non ceramic)
Frame
Quarq
Head fork assembly (had to use Calnago's C60 build thread for this....thanks official Colnago for providing instructions....not)
Fork paint job
Seatpost weigh
Fancy box
Build options:
A) Buy R8050 di2 to go with the Quarq pm......then I would have 2 bikes...
B) Transfer all my Chorus groupset over (except cranks of course) and stay mechanical and use the di2 money a set of Bora One 35's or equivalent to replace my Campagnolo Zonda
C) ....don't know...
Colnago C60 plgr size 48S
Moderator: robbosmans
Factor Ostro VAM
viewtopic.php?f=3&t=171023
Colnago C60
F12 Rim
viewtopic.php?f=10&t=159065&start=15
viewtopic.php?f=3&t=171023
Colnago C60
F12 Rim
viewtopic.php?f=10&t=159065&start=15
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
-
- Posts: 85
- Joined: Thu Jun 11, 2015 9:26 am
Regarding your build options, is mixing Shimano chainrings and Campa front mech a good idea? Have you done any research on this?
I've tried but there isn't much info on it. Its a 11spd so according to forums, they should mix ok.r4nd0mv4r14bl3 wrote: ↑Sun Mar 25, 2018 7:37 pmRegarding your build options, is mixing Shimano chainrings and Campa front mech a good idea? Have you done any research on this?
I've heard people using Record chains on sram/shimano, campy chain and cassette on shimano drivetrain etc etc
Will let you know once the bike is built.
Factor Ostro VAM
viewtopic.php?f=3&t=171023
Colnago C60
F12 Rim
viewtopic.php?f=10&t=159065&start=15
viewtopic.php?f=3&t=171023
Colnago C60
F12 Rim
viewtopic.php?f=10&t=159065&start=15