Page 1 of 1

Enve fork blackout decals

Posted: Thu Mar 01, 2018 8:21 pm
by glepore
Anyone holding or have a source?

Re: Enve fork blackout decals

Posted: Fri Mar 02, 2018 7:14 am
by RyanH
Jeff Kokies used to be the only source but Enve told him to stop. I believe Firefly will sell them for about $30 a set.

Re: Enve fork blackout decals

Posted: Fri Mar 02, 2018 7:14 am
by Weenie

Re: Enve fork blackout decals

Posted: Fri Mar 02, 2018 2:03 pm
by billspreston
I could make you the vector artwork for a vinyl cutter if you have a pair of calipers and can measure the logo dimensions exactly. I assume the overlay decal needs to be just slightly bigger to hide the white logo with some tolerance. Then it should be pretty cheap and easy to get some decals cut.

Re: Enve fork blackout decals

Posted: Fri Mar 02, 2018 3:25 pm
by glepore
Bill-thanks, will try this.

Re: Enve fork blackout decals

Posted: Fri Mar 02, 2018 10:25 pm
by glepore
Bill-thanks for the offer-I get 30 x 140mm for the ENVE and 16.5 x 26.6 for the small Road 2.0.
I had to measure the length of the enve with a tape as my calipers didn't reach, but I'm confident. If you can do the vectors I'll get a small batch printed for our own use.

Re: Enve fork blackout decals

Posted: Fri Nov 16, 2018 10:03 pm
by kokies
I am still doing these as custom orders. You can message me here or on paceline under the same user name.


Sent from my iPhone using Tapatalk

Re: Enve fork blackout decals

Posted: Fri Nov 16, 2018 10:03 pm
by Weenie

Re: Enve fork blackout decals

Posted: Sat Nov 17, 2018 3:12 am
by kode54
had i known, i would have had a set made since i couldn't find them on eBay anymore.

i ended up spray painting them with a hobby rattlecan, matte black. cleaned surface with alcohol, then lightly laid down a few thin coats until the desired black out. i didn't even take the tire off, LOL. you can't even see where the large white Enve logo was.