Enve fork blackout decals

Discuss light weight issues concerning road bikes & parts.
Post Reply
glepore
Posts: 1160
Joined: Thu Mar 28, 2013 4:42 pm
Location: Virginia USA

by glepore

Anyone holding or have a source?
Cysco Ti custom Campy SR mechanical (6.9);Cannondale SS Evo Di2 7970 (5.79); Willier Cento Uno Air Di2 9070 (7.0); C40 Mk2 DA 7800 ; Anvil Custom steel Etap;1996 Colnago Technos Record

by Weenie


RyanH
Moderator
Posts: 2235
Joined: Tue Jan 17, 2012 4:01 pm
Location: Los Angeles, CA
Contact:

by RyanH

Jeff Kokies used to be the only source but Enve told him to stop. I believe Firefly will sell them for about $30 a set.

billspreston
Posts: 370
Joined: Tue Jun 30, 2009 7:40 pm
Location: CA

by billspreston

I could make you the vector artwork for a vinyl cutter if you have a pair of calipers and can measure the logo dimensions exactly. I assume the overlay decal needs to be just slightly bigger to hide the white logo with some tolerance. Then it should be pretty cheap and easy to get some decals cut.

glepore
Posts: 1160
Joined: Thu Mar 28, 2013 4:42 pm
Location: Virginia USA

by glepore

Bill-thanks, will try this.
Cysco Ti custom Campy SR mechanical (6.9);Cannondale SS Evo Di2 7970 (5.79); Willier Cento Uno Air Di2 9070 (7.0); C40 Mk2 DA 7800 ; Anvil Custom steel Etap;1996 Colnago Technos Record

glepore
Posts: 1160
Joined: Thu Mar 28, 2013 4:42 pm
Location: Virginia USA

by glepore

Bill-thanks for the offer-I get 30 x 140mm for the ENVE and 16.5 x 26.6 for the small Road 2.0.
I had to measure the length of the enve with a tape as my calipers didn't reach, but I'm confident. If you can do the vectors I'll get a small batch printed for our own use.
Cysco Ti custom Campy SR mechanical (6.9);Cannondale SS Evo Di2 7970 (5.79); Willier Cento Uno Air Di2 9070 (7.0); C40 Mk2 DA 7800 ; Anvil Custom steel Etap;1996 Colnago Technos Record

kokies
Posts: 5
Joined: Wed Jul 09, 2014 4:33 pm

by kokies

I am still doing these as custom orders. You can message me here or on paceline under the same user name.


Sent from my iPhone using Tapatalk

by Weenie


kode54
Posts: 1325
Joined: Tue May 23, 2006 9:39 pm

by kode54

had i known, i would have had a set made since i couldn't find them on eBay anymore.

i ended up spray painting them with a hobby rattlecan, matte black. cleaned surface with alcohol, then lightly laid down a few thin coats until the desired black out. i didn't even take the tire off, LOL. you can't even see where the large white Enve logo was.
- AX Lightness Vial EVO D + DA9150 + Enve SES 4.5 carbon hubs
- Parlee Altum + DA9150 + Enve SES 4.5 carbon hubs
- Parlee ESX + DA9150 + THM SRM PM + Enve SES 6.7 CK hubs
- Guru Praemio R Titanium + DA9150 + Enve 3.4 CK hubs

Post Reply
  • Similar Topics
    Replies
    Views
    Last post