2013 hollogram srm crank on 2017 super six evo?

Discuss light weight issues concerning road bikes & parts.
Post Reply
ninjanoir78
Posts: 202
Joined: Sat Jul 19, 2008 8:14 pm

by ninjanoir78

HI,

not sure if my srm sisl 2013 works on 2017 or 2018 super six evo frame?

thanks
Ninja

by Weenie


topflightpro
Posts: 828
Joined: Tue Jan 13, 2009 2:35 am

by topflightpro

It should be plug and play. You may need a slightly longer spindle though. It kind of depends on what you got in 2013. I think Cannondale was shipping the longer BB30A spindles then, but I don't know for sure.

User avatar
ms6073
Posts: 2523
Joined: Fri Jul 23, 2004 8:24 pm
Location: Houston, Texas

by ms6073

If the BB30A uses the 109 mm road spindle, then I believe Cannondale started shipping that new style spindle by mid 2013 but for the OP, the sure way to know is to check if your spindle looks like the one in the image below:

Image
Michael - The Anaerobic Threshold is neither...

ninjanoir78
Posts: 202
Joined: Sat Jul 19, 2008 8:14 pm

by ninjanoir78

ms6073 wrote:
Wed Feb 21, 2018 12:56 am
If the BB30A uses the 109 mm road spindle, then I believe Cannondale started shipping that new style spindle by mid 2013 but for the OP, the sure way to know is to check if your spindle looks like the one in the image below:

Image
what i know, I have a stop shoulder on my spindle...
Ninja

User avatar
ms6073
Posts: 2523
Joined: Fri Jul 23, 2004 8:24 pm
Location: Houston, Texas

by ms6073

That means you have the older spindle which will probably not be long enough for a BB30A which from my understanding is 73 mm wide versus 68 mm for BB30.
Michael - The Anaerobic Threshold is neither...

Post Reply
  • Similar Topics
    Replies
    Views
    Last post