New cannondale SYSTEMSIX road frame!

Discuss light weight issues concerning road bikes & parts.

Moderator: robbosmans

lazyriderzhao
Posts: 33
Joined: Tue Apr 14, 2020 4:48 pm

by lazyriderzhao

Just finish my build
IMG_1381(20200418-183305).JPG
viewtopic.php?f=10&t=161245

by Weenie


hannawald
Posts: 973
Joined: Sat Dec 17, 2016 7:28 pm
Location: Czech Republic

by hannawald

looks really sharp!

tanbrett87
Posts: 13
Joined: Wed Apr 22, 2020 5:01 pm
Location: Your Local River in the US

by tanbrett87

For those that run fully integrated mechanical setups through the handlebar, stem and head tube:

1.) Did you use an aftermarket cable system like Alligator iLink or Jagwire Elite Link to make the tight bends through the cockpit?

2.) Can you use the BB cable guide as a cable stop for the derailleurs (and rear brake if you’ve got mechanical discs)? I think I read that someone did this but can't remember where I saw this, if it was this thread or elsewhere.

3.) How is the real world shifting performance? I’m planning on building with Campy SuperRecord 11spd with a Quarq PM and have heard the front derailleur can be finicky during shifts from small to big ring.

I've read Damon's response that this routing is possible, just not endorsed by Cannondale and that there is some degradation in shifting performance.

Thanks for the input!
@tanbrett87
2016 S-Works Tarmac
2019 Felt IA2 Disc
2019 Cannondale SystemSix HI-MOD (building)

Unniti
Posts: 484
Joined: Wed Mar 25, 2020 3:35 pm

by Unniti

Does the SystemSix have clearance problems with 12 speed? The SuperSix thread has reports of clearance issues with AXS. One of the local shops has a scorching deal on a 2019 Ultegra model. If I were to buy it I'd strip the frame for 12 speed Campy.

User avatar
Dan Gerous
Posts: 1922
Joined: Sun Aug 12, 2007 6:28 pm

by Dan Gerous

Unniti wrote:
Wed Apr 22, 2020 8:27 pm
Does the SystemSix have clearance problems with 12 speed? The SuperSix thread has reports of clearance issues with AXS. One of the local shops has a scorching deal on a 2019 Ultegra model. If I were to buy it I'd strip the frame for 12 speed Campy.
The chain is not on the 10t cog but, looks like clearance is okay on this SystemSix with red AXS.

Image

I'm not sure if Campagnolo have moved/widened their 12 speed cassettes outboard compared to 11 speed like SRAM did though, I thought they didn't, leaving the 11t cog on their 12 speed cassette exactly at the same place the 11t cog was on their 11 speed cassette.

req110
Posts: 105
Joined: Thu Nov 22, 2018 10:23 am

by req110

deleted
Last edited by req110 on Wed Apr 29, 2020 3:40 pm, edited 2 times in total.

req110
Posts: 105
Joined: Thu Nov 22, 2018 10:23 am

by req110

deleted
Last edited by req110 on Wed Apr 29, 2020 3:41 pm, edited 1 time in total.

req110
Posts: 105
Joined: Thu Nov 22, 2018 10:23 am

by req110

deleted
Last edited by req110 on Wed Apr 29, 2020 3:40 pm, edited 1 time in total.

req110
Posts: 105
Joined: Thu Nov 22, 2018 10:23 am

by req110

I am selling also frameset, it's 56cm Hi-Mod, the one from my topic.

If you are interested leave me a PM with your email. I am shipping from Czech Republic, probably only within European trade area.

floriansantana
Posts: 146
Joined: Thu Dec 25, 2014 8:57 pm

by floriansantana

Selling a Raceware Wahoo ELEMNT Bolt Mount for SystemBar or SaveBar, because I’m switching to an ELEMNT Roam (and already ordered the mount for that). It’s perfectly new and looks a 1000 times better than the one from Cannondale.

PM if interested.
Attachments
79FAF628-006B-4922-8B3C-BD1D14398D52.jpeg
CD318571-CF46-4B42-B0F9-2B12DD6E6A7A.jpeg
Cannondale SuperSix Evo Disc
Cannondale SystemSix HiMod Disc
@floriansantana

floriansantana
Posts: 146
Joined: Thu Dec 25, 2014 8:57 pm

by floriansantana

Can someone who owns a SystemSix EF frame in size 56 (or 54) give me the measurement for the Cannondale font-logo on the downtube? I’d need the full length, the height of the font (probably of the „d“ or the „l“) and where it starts (measured from the BB).

Thanks in advance, need it for a custom paint job.
Cannondale SuperSix Evo Disc
Cannondale SystemSix HiMod Disc
@floriansantana

woodyvalentine
Posts: 98
Joined: Fri Mar 27, 2015 11:40 pm

by woodyvalentine

floriansantana wrote:
Tue Jun 23, 2020 9:54 am
Can someone who owns a SystemSix EF frame in size 56 (or 54) give me the measurement for the Cannondale font-logo on the downtube? I’d need the full length, the height of the font (probably of the „d“ or the „l“) and where it starts (measured from the BB).

Thanks in advance, need it for a custom paint job.

About 323mm x 43mm is the font and about 10mm from the edge of the BB

floriansantana
Posts: 146
Joined: Thu Dec 25, 2014 8:57 pm

by floriansantana

woodyvalentine wrote:
Sat Jun 27, 2020 6:41 pm
floriansantana wrote:
Tue Jun 23, 2020 9:54 am
Can someone who owns a SystemSix EF frame in size 56 (or 54) give me the measurement for the Cannondale font-logo on the downtube? I’d need the full length, the height of the font (probably of the „d“ or the „l“) and where it starts (measured from the BB).

Thanks in advance, need it for a custom paint job.

About 323mm x 43mm is the font and about 10mm from the edge of the BB
Cool, thanks. But just to be sure: You mean 100mm (10cm) from the edge of the BB, right? 10mm seem very strange.
Cannondale SuperSix Evo Disc
Cannondale SystemSix HiMod Disc
@floriansantana

woodyvalentine
Posts: 98
Joined: Fri Mar 27, 2015 11:40 pm

by woodyvalentine

floriansantana wrote:
Tue Jun 30, 2020 9:35 am
woodyvalentine wrote:
Sat Jun 27, 2020 6:41 pm
floriansantana wrote:
Tue Jun 23, 2020 9:54 am
Can someone who owns a SystemSix EF frame in size 56 (or 54) give me the measurement for the Cannondale font-logo on the downtube? I’d need the full length, the height of the font (probably of the „d“ or the „l“) and where it starts (measured from the BB).

Thanks in advance, need it for a custom paint job.

About 323mm x 43mm is the font and about 10mm from the edge of the BB
Cool, thanks. But just to be sure: You mean 100mm (10cm) from the edge of the BB, right? 10mm seem very strange.
Yes sorry. 10cm / 100mm from edge of BB.

danridesbikes
Posts: 79
Joined: Wed Feb 24, 2010 8:27 pm

by danridesbikes

changed from Roval CL64 to Knot64 & Saddle to S-Works Power, also switched out the Axles to Robert Axle Project

Image
Image
Image
Image
Image
gif upload site

by Weenie


Post Reply