Page 1 of 3
Custom steel frame builders
Posted: Tue Jan 30, 2018 5:05 pm
by martinfrias
Thinking in building a custom disc frame in stainless, any info on builders?
Re: Custom steel frame builders
Posted: Tue Jan 30, 2018 5:06 pm
by elfuinha
Re: Custom steel frame builders
Posted: Tue Jan 30, 2018 5:06 pm
by Weenie
Visit
starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Re: Custom steel frame builders
Posted: Tue Jan 30, 2018 5:34 pm
by 853guy
martinfrias wrote: ↑Tue Jan 30, 2018 5:05 pm
Thinking in building a custom disc frame in stainless, any info on builders?
Hi martinfrias,
I've been pondering the same question for a frame in XCr (sans discs).
I've shortlisted the following:
Independent Fabrications (USA)
Field (UK)
Hartley (UK)
Obviously, there are plenty more to choose from (Victoire, Passoni, Tommasini), but in terms of aesthetics, fit, build quality and ease of communication for me personally, I have no doubt those three above could build me a bike to last a lifetime, turnaround notwithstanding (between three and eighteen months).
Let us know how you get on.
Best,
853guy
Re: Custom steel frame builders
Posted: Tue Jan 30, 2018 5:43 pm
by Broady
Feather, build quality second to none, does amazing stainless work too -
https://www.instagram.com/feathercycles/
Re: Custom steel frame builders
Posted: Tue Jan 30, 2018 6:18 pm
by morganb
Cherubim makes beautiful stainless bikes as does English, especially if you want something unique looking.
Re: Custom steel frame builders
Posted: Tue Jan 30, 2018 8:12 pm
by Valbrona
But seemingly not clever enough to TIG weld.
Re: Custom steel frame builders
Posted: Tue Jan 30, 2018 8:40 pm
by Zakalwe
Can you sand TIG welds down smooth like you can on brazed joins as per the Feather?
Re: Custom steel frame builders
Posted: Tue Jan 30, 2018 9:06 pm
by shimmeD
Filing back welds just doesn't seem to be done much (too hard or weaken joints? I don't know).
You could braze/fill in and over the welds with brass.
Re: Custom steel frame builders
Posted: Tue Jan 30, 2018 9:26 pm
by Zakalwe
I’d take a smoothly sanded braze over nasty looking welds any day, not sure about the unpainted look though.
Re: Custom steel frame builders
Posted: Tue Jan 30, 2018 9:37 pm
by yinya
Hampsten, Zanconato, Gaulzetti (alu as well), Amaro were my shortlist couple of years back. Was also looking at Jaegher and Speedvagen
Sent from my iPhone using Tapatalk
Re: Custom steel frame builders
Posted: Tue Jan 30, 2018 9:42 pm
by shimmeD
Depends on what you perceive as ugly; small consistent TIG beads exude skill and a certain beauty to me. Check out Mosaic.
Re: Custom steel frame builders
Posted: Tue Jan 30, 2018 10:09 pm
by 853guy
yinya wrote: ↑Tue Jan 30, 2018 9:37 pm
Hampsten, Zanconato, Gaulzetti (alu as well), Amaro were my shortlist couple of years back. Was also looking at Jaegher and Speedvagen
Sent from my iPhone using Tapatalk
Do you mind saying what you went with?
Cheers,
853guy
Re: Custom steel frame builders
Posted: Tue Jan 30, 2018 10:35 pm
by yinya
Amaro and love it.
Sent from my iPhone using Tapatalk
Re: Custom steel frame builders
Posted: Tue Jan 30, 2018 10:45 pm
by guyc
I went with Rusby Cycles for my XCr custom
Re: Custom steel frame builders
Posted: Tue Jan 30, 2018 10:45 pm
by Weenie
Visit
starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Re: Custom steel frame builders
Posted: Tue Jan 30, 2018 11:00 pm
by Broady
Valbrona wrote: ↑Tue Jan 30, 2018 8:12 pm
But seemingly not clever enough to TIG weld.
Hmm well I have a Tigged Feather in my living room, how could that have happened?