Gear/Brake cable set for internally cabled S-Works

Discuss light weight issues concerning road bikes & parts.
Post Reply
JBC2
Posts: 16
Joined: Sat Jan 13, 2018 4:51 pm

by JBC2

Hi, any recommendations on a complete gear and brake cable kit that has sufficient of everything for an internally cabled Venge?

Bike was build up last year by LBS using a Jagwire kit but I suspect there was not sufficient cables and everything is very tight in the cockpit.

Stripping it all off and installing again but don't want to make same mistake.

Do Shimano do a 6800 kit that has sufficient length for internal routing?

Many thanks

User avatar
marcelflash
Posts: 88
Joined: Mon Sep 01, 2008 5:07 pm
Location: Zwaag Nederland

by marcelflash

Just go to a shop who has outercable on a roll.
Innercable Dura-ace polymer is the best for a frame with tight bents like the Venge Vias or with cables going trough the bars.
Be shure to use long nosed end caps from aluminium (Shimano/Jagwire) or the shunts from Specialized.

by Weenie


Post Reply
  • Similar Topics
    Replies
    Views
    Last post