Will the Facom U301 bearing puller remove Ultra Torque bearings?
Moderator: robbosmans
- bikerjulio
- Posts: 1900
- Joined: Fri Dec 11, 2009 10:38 pm
- Location: Welland, Ontario
I cannot tell you 100% but it looks OK.
You will need a blank disc over the Hirth joint for the screw to bear on.
If you have never done this before be sure to remove the retaining clip for the DS bearing.
You also need the appropriate tool for reinstalling the bearing that pushes evenly on the inner race only.
You will need a blank disc over the Hirth joint for the screw to bear on.
If you have never done this before be sure to remove the retaining clip for the DS bearing.
You also need the appropriate tool for reinstalling the bearing that pushes evenly on the inner race only.
There's sometimes a buggy.
How many drivers does a buggy have?
One.
So let's just say I'm drivin' this buggy...
and if you fix your attitude you can ride along with me.
http://www.youtube.com/watch?v=GekiIMh4ZkM
How many drivers does a buggy have?
One.
So let's just say I'm drivin' this buggy...
and if you fix your attitude you can ride along with me.
http://www.youtube.com/watch?v=GekiIMh4ZkM
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com