Etap hydro

Discuss light weight issues concerning road bikes & parts.
Post Reply
markyboy
Posts: 720
Joined: Wed Dec 29, 2010 10:22 pm
Location: Bristol uk

by markyboy

I have ultegra disc bike but would like to change the brakeset to sram hydro disc etap.
I have the etap front and rear mech and chainset so i dont need the whole lot.
Can i just take off the ultegra shifters and fit it straight to the sram set up?will the hoses fit straight on etc?to save re routing the whole lot.
Colnago master with campagnolo super record 12
Pinarello f8 with campagnolo super record 11
Eddy merckx 69 ultegra disc winter bike ultegra r8000

by Weenie


jlok
Posts: 734
Joined: Tue Jun 30, 2015 3:30 am

by jlok

U need SRAM specific calipers as well.
Giant Propel Advanced SL Disc 1 / BMC TM02 < Propel Adv < TCR Adv SL Disc < KTM Revelator Sky < CAAD 12 Disc < Domane S Disc < Alize < CAAD 10

markyboy
Posts: 720
Joined: Wed Dec 29, 2010 10:22 pm
Location: Bristol uk

by markyboy

Yes i know but will the hoses just pull off of ultegra and fit onto sram or will i need to reroute the whole lot
Colnago master with campagnolo super record 12
Pinarello f8 with campagnolo super record 11
Eddy merckx 69 ultegra disc winter bike ultegra r8000

jlok
Posts: 734
Joined: Tue Jun 30, 2015 3:30 am

by jlok

U need new SRAM hose. When u buy the etap hrd shifter and caliper set the hose will come together, bled.
Giant Propel Advanced SL Disc 1 / BMC TM02 < Propel Adv < TCR Adv SL Disc < KTM Revelator Sky < CAAD 12 Disc < Domane S Disc < Alize < CAAD 10

markyboy
Posts: 720
Joined: Wed Dec 29, 2010 10:22 pm
Location: Bristol uk

by markyboy

Ok thanks,but you still need to thread the hose through the frame so will have to disconnect then re connect.
Colnago master with campagnolo super record 12
Pinarello f8 with campagnolo super record 11
Eddy merckx 69 ultegra disc winter bike ultegra r8000

User avatar
Frankie - B
Administrator
Posts: 6697
Joined: Mon Jun 02, 2003 8:17 am
Location: Drenthe, Holland

by Frankie - B

In a way, you are asking if a campagnolo derailleur will work on a shimano shifter. The shimano hoses come with a connector that works for shimano style shifters. On top of that, Shimano uses mineral oil and Sram is using Dot. As you might know, the seals for dot, don't like mineral oil and vice versa.

Best is to dismantle that braking system, build it up with the sram parts and then bleed it for best performance.

Good luck! :thumbup:
'Tape was made to wrap your GF's gifts, NOT hold a freakin tire on.'
Please follow me on Instagram

User avatar
ultimobici
in the industry
Posts: 3148
Joined: Sun Nov 21, 2004 2:45 pm
Location: London, UK
Contact:

by ultimobici

You’ll need to use the Sram hoses. Sram use Dot fluid and Shimano use mineral oil. The two don’t mix.


Sent from my iPhone using Tapatalk

markyboy
Posts: 720
Joined: Wed Dec 29, 2010 10:22 pm
Location: Bristol uk

by markyboy

Ok thanks guys i am new to all this disc stuff.
Colnago master with campagnolo super record 12
Pinarello f8 with campagnolo super record 11
Eddy merckx 69 ultegra disc winter bike ultegra r8000

User avatar
GonaSovereign
Posts: 541
Joined: Thu Nov 24, 2005 2:34 pm
Location: New Zero Kanada 43° 40' 0" N, 79° 25' 0" W

by GonaSovereign

markyboy wrote: ↑
Sun Dec 24, 2017 12:26 pm
Ok thanks guys i am new to all this disc stuff.
Ultegra disc is really good. Shimano brakes work better than SRAM as well. What's driving the switch? Weight?

User avatar
LeDuke
Posts: 1342
Joined: Sun Oct 07, 2012 2:39 am
Location: Front Range, CO

by LeDuke

This isn't going to work.

Sent from my XT1585 using Tapatalk


markyboy
Posts: 720
Joined: Wed Dec 29, 2010 10:22 pm
Location: Bristol uk

by markyboy

GonaSovereign wrote: ↑
Mon Dec 25, 2017 1:46 am
markyboy wrote: ↑
Sun Dec 24, 2017 12:26 pm
Ok thanks guys i am new to all this disc stuff.
Ultegra disc is really good. Shimano brakes work better than SRAM as well. What's driving the switch? Weight?
I have an etap front and rear mech which i would like to use so thought about getting the etap shifters and brakeset.
I thought i could just swap it out and keep the hoses in place.
Colnago master with campagnolo super record 12
Pinarello f8 with campagnolo super record 11
Eddy merckx 69 ultegra disc winter bike ultegra r8000

User avatar
VTR1000SP2
Posts: 491
Joined: Tue Nov 05, 2013 8:21 pm

by VTR1000SP2

If weight is the main goal, go with 8070 shifters, 9150 derailleurs and it’s a much easier swap.


Sent from my iPhone using Tapatalk
42.

User avatar
ergott
Posts: 2874
Joined: Tue Apr 18, 2006 3:03 am
Location: Islip, NY
Contact:

by ergott

VTR1000SP2 wrote:If weight is the main goal, go with 8070 shifters, 9150 derailleurs and it’s a much easier swap.


Sent from my iPhone using Tapatalk
If swapping levers you still have to rebleed system anyway. If there are lines already in the frame, threading new ones is usually very easy.

It comes down to which system the OP wants to use.

Sent from my SM-G950U using Tapatalk


by Weenie


Post Reply
  • Similar Topics
    Replies
    Views
    Last post