The ultimate saddle bag
Moderator: robbosmans
My content is shown in post No 137, with two light road tubes, so I'm pretty sure there is enough space for one light mtb inner.
Rich how's it look on the bike?CrankAddictsRich wrote: ↑Tue Jan 08, 2019 2:15 amHere is everything that I've fit in my Ranger S. The tube is a standard road tube.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
-
- Posts: 2315
- Joined: Wed Jan 27, 2016 1:39 pm
- Contact:
Here's a bunch from back on page 10.
-
- Posts: 897
- Joined: Fri Aug 24, 2018 4:43 pm
I thought I’d share my hack with you guys. My saddle bag needs are very very modest in terms of volume. I wanted something to fit Topeak micro rocket pump, tubeless tyre worms with the little sharp tool to plug them in, a couple of hex keys and house keys. Unfortunately, 1) every saddle bag long enough to fit the pump is too big for these few bits, and they just dangle about, while 2) small saddle bags tend to be too short, and 3) they are all too heavy (come on, who needs those extra 30g). So, here is the hack.
Ingredients:
- a small neoprene pencil case with a zip, like this https://www.amazon.co.uk/Colorline-5948 ... 51&sr=8-17
- tie-less elastic shoe laces https://www.amazon.co.uk/gp/product/B07 ... UTF8&psc=1
The case is actually too long for the pump, so I cut off the extra bit, and sown up the hole. Then poked some holes in the right places to make a bit of a lacing pattern. You can kind of see how on the pics. Result:
- a saddle bag that fits just the right amount of stuff, and weighs 20g
- does not rattle and is securely attached to the saddle rails
- aero: the width is the same as the seat post
- cheaper than anything else on the market
Obviously if you want to carry a spare tube this precise setup won’t work, but there are probably slightly bigger neoprene cases out there, and crafting something that fits exactly what you want to carry is really not that challenging. You could probably even use a sheet of neoprene as a wrapper and attach it with the same lacing system.
Ingredients:
- a small neoprene pencil case with a zip, like this https://www.amazon.co.uk/Colorline-5948 ... 51&sr=8-17
- tie-less elastic shoe laces https://www.amazon.co.uk/gp/product/B07 ... UTF8&psc=1
The case is actually too long for the pump, so I cut off the extra bit, and sown up the hole. Then poked some holes in the right places to make a bit of a lacing pattern. You can kind of see how on the pics. Result:
- a saddle bag that fits just the right amount of stuff, and weighs 20g
- does not rattle and is securely attached to the saddle rails
- aero: the width is the same as the seat post
- cheaper than anything else on the market
Obviously if you want to carry a spare tube this precise setup won’t work, but there are probably slightly bigger neoprene cases out there, and crafting something that fits exactly what you want to carry is really not that challenging. You could probably even use a sheet of neoprene as a wrapper and attach it with the same lacing system.
That's a really nice hack! Thanks for sharing.aeroisnteverything wrote: ↑Fri Apr 05, 2019 10:21 amI thought I’d share my hack with you guys. My saddle bag needs are very very modest in terms of volume. I wanted something to fit Topeak micro rocket pump, tubeless tyre worms with the little sharp tool to plug them in, a couple of hex keys and house keys. Unfortunately, 1) every saddle bag long enough to fit the pump is too big for these few bits, and they just dangle about, while 2) small saddle bags tend to be too short, and 3) they are all too heavy (come on, who needs those extra 30g). So, here is the hack.
Ingredients:
- a small neoprene pencil case with a zip, like this https://www.amazon.co.uk/Colorline-5948 ... 51&sr=8-17
- tie-less elastic shoe laces https://www.amazon.co.uk/gp/product/B07 ... UTF8&psc=1
The case is actually too long for the pump, so I cut off the extra bit, and sown up the hole. Then poked some holes in the right places to make a bit of a lacing pattern. You can kind of see how on the pics. Result:
- a saddle bag that fits just the right amount of stuff, and weighs 20g
- does not rattle and is securely attached to the saddle rails
- aero: the width is the same as the seat post
- cheaper than anything else on the market
Obviously if you want to carry a spare tube this precise setup won’t work, but there are probably slightly bigger neoprene cases out there, and crafting something that fits exactly what you want to carry is really not that challenging. You could probably even use a sheet of neoprene as a wrapper and attach it with the same lacing system.
Still waiting to see one that is like many of the heck and tiny ones here intended for a tubular. Seems to be the unicorn of them all!!
The Herd
viewtopic.php?f=10&t=149524
viewtopic.php?f=10&t=149524
SNAP.B with its extended sleeve is able to accomodate a folded 23c clincher tire. I would assume it can hold a tubular tire too.
@Survivor I see that your kickstarter is running again. Another question for you. What fatigue analysis have you completed to take account of impact of vibrations from the road causing the plastic clips to fail? I've known of so instances of camera mounts to fail for this reason.
Sent from my CLT-L09 using Tapatalk
Sent from my CLT-L09 using Tapatalk
-
- Posts: 680
- Joined: Sun Mar 24, 2019 9:17 am
I use the same saddle bag - it is simply brilliant and one of the best looking solutions imho. Hate those large zipup bags most people use.CrankAddictsRich wrote: ↑Tue Jan 08, 2019 2:15 amHere is everything that I've fit in my Ranger S. The tube is a standard road tube.
Bianchi Oltre XR4
Celeste Matte
Campy SR 11spd mechanical
Bora Ultra 50 tubs
Viseon 5D / stock bits and parts
Bianchi Specialissima Pantani Edition
Campy R 12spd mechanical
Fulcrum Racing Speed 35 tubs
FSA / Deda bits and parts
Celeste Matte
Campy SR 11spd mechanical
Bora Ultra 50 tubs
Viseon 5D / stock bits and parts
Bianchi Specialissima Pantani Edition
Campy R 12spd mechanical
Fulcrum Racing Speed 35 tubs
FSA / Deda bits and parts
Hi Survivor,survivor wrote:For those of you that plan to attend Sea Otter Classic bike expo next week, please stop by booth L29 and check us out!
Any new developments on your project? Still think it’s a very interesting design.
Envoyé de mon iPhone en utilisant Tapatalk
Hi, thank you for keeping us in mind. We just relaunched our Kickstarter campaign 4 days ago in conjunction with our exposition at Sea Otter Classic. We are over 50% funded 4 days into the campaign and by the great respond we got at Sea Otter Classic from the crowd and distributors, we are optimistic that we will be able to get the campaign over the finish line this time. Please support us at https://www.kickstarter.com/projects/vo ... addle-bag/C36 wrote: ↑Sat Apr 13, 2019 10:20 pmHi Survivor,survivor wrote:For those of you that plan to attend Sea Otter Classic bike expo next week, please stop by booth L29 and check us out!
Any new developments on your project? Still think it’s a very interesting design.
Envoyé de mon iPhone en utilisant Tapatalk
We have ran our attachment system with full load on our test jig for over 1500 hours now without failure. Our test jig was created with the sole purpose of torturing our attachment system and stress test it’s capability.iwheel wrote: ↑Sat Apr 13, 2019 10:24 am@Survivor I see that your kickstarter is running again. Another question for you. What fatigue analysis have you completed to take account of impact of vibrations from the road causing the plastic clips to fail? I've known of so instances of camera mounts to fail for this reason.
Sent from my CLT-L09 using Tapatalk
Please checkout the video of the test jig in action:
I'm was thinking about getting the Rapha saddle bag but it seems like the Snap.B crowdfunded campaign might be successful this time around?
Here's the Rapha bag. I might just get it when it goes on sale and also order the Snap.B
https://www.rapha.cc/us/en_US/shop/sadd ... SDP01XXBPK
Here's the Rapha bag. I might just get it when it goes on sale and also order the Snap.B
https://www.rapha.cc/us/en_US/shop/sadd ... SDP01XXBPK
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
We are humbled by the amazing support given to SNAP.B so far. We have been successfully funded 8 days into our Kickstarter campaign. We hope to get you as one of our backers!hanakuso1 wrote: ↑Tue Apr 23, 2019 7:11 pmI'm was thinking about getting the Rapha saddle bag but it seems like the Snap.B crowdfunded campaign might be successful this time around?
Here's the Rapha bag. I might just get it when it goes on sale and also order the Snap.B
https://www.rapha.cc/us/en_US/shop/sadd ... SDP01XXBPK
Check out our Kickstarter campaign here: https://www.kickstarter.com/projects/vo ... addle-bag/