Campagnolo Bora freehub grease

Discuss light weight issues concerning road bikes & parts.
Post Reply
Posts: 29
Joined: Mon Feb 22, 2016 9:41 pm

by wedgie

I'm replacing the outboard bearing on my Campagnolo Bora One freehub. Campagnolo recommend their own LB-100 grease to lubricate the pawls and ratchet teeth when reassembling, but I can't find it anywhere. Any recommendations for an alternative grease?

by Weenie

User avatar
Posts: 1901
Joined: Fri Dec 11, 2009 10:38 pm
Location: Welland, Ontario

by bikerjulio

It should be low viscosity, not sticky. I use lithium grease. It's easy to check the pawl action before you reassemble.
There's sometimes a buggy.
How many drivers does a buggy have?


So let's just say I'm drivin' this buggy...
and if you fix your attitude you can ride along with me.

User avatar
Posts: 2928
Joined: Thu Jan 22, 2015 4:11 pm

by TonyM

I had the same problem as I couldn't get the LB-100 in USA/ Canada.

I saw however that Campagnolo North America recommends the Dumonde Tech PRO X Freehub Grease as an alternative to their lb-100 Grease as it is no longer available in North America. ... ub-grease/

I bought mine here: ... ubricants/

But here some other options: ... 34a7f-ed06

Hope it helps!

Posts: 485
Joined: Wed Sep 05, 2007 2:02 pm

by Mackers

Campy grease is just rebranded Kluber Isoflex Nb52.

Post Reply
  • Similar Topics
    Last post