Page 1 of 1

2018 Cervelo R5 weight

Posted: Sun Oct 08, 2017 8:42 pm
by salesguy
Just getting started building up this 2018 R5 rim brake.

834g with hanger, braze on for front mech & bottle cage bolts. Not included were rubber port covers, headset, etc.

803 as a bare frame

Planning to weigh all the parts as I built it up, and create a build thread as I go. This frame will be getting 9150 Di2 parts, Shimano Pro cockpit & saddle, Zipp 404 wheels and a quarq D-Four91 crankset with 9100 rings. I don't expect it to be much less than 16lbs but it should be trouble free and a great ride.

Re: 2018 Cervelo R5 weight

Posted: Sun Oct 08, 2017 10:58 pm
by lowside67
What is the frame size?

-Mark

Re: 2018 Cervelo R5 weight

Posted: Sun Oct 08, 2017 10:58 pm
by Weenie

Re: 2018 Cervelo R5 weight

Posted: Mon Oct 09, 2017 3:02 am
by NYCPrynne
I have a 54 cm 2014 R5 with Dura-ace and Zipp 404 FC clinchers that runs 6.7 kg, so I think you will be able to get under 6.8 kg.

Re: 2018 Cervelo R5 weight

Posted: Mon Oct 09, 2017 8:04 am
by mrlobber
Nice to see the weight +/- corresponding to stated weights! :thumbup:

Re: 2018 Cervelo R5 weight

Posted: Mon Oct 09, 2017 9:25 am
by salesguy
lowside67 wrote:What is the frame size?

-Mark


56cm

Sorry for leaving out that important detail!

Re: 2018 Cervelo R5 weight

Posted: Mon Oct 09, 2017 11:56 am
by dalex
Good weight. Have you weighed the fork?

Re: 2018 Cervelo R5 weight

Posted: Mon Oct 09, 2017 1:54 pm
by salesguy
Yes, 328g uncut

I'll post weights of every single part on the build thread.

So far the heavier items are:

Seatpost: 212g
PRO Saddle: 152g
9100 Pedals: 234g

Coming in pretty light:
9150 Front Der.: 103g
9150 Rear Der.; 196g
PRO Vibe Stem: 143g (the new model is very nice with great finish and dark anodized Ti hardware. Very nice part.
PRO Carbon UD cages: 21g (without bolts)

Re: 2018 Cervelo R5 weight

Posted: Mon Oct 09, 2017 1:54 pm
by Weenie