2018 Cervelo R5 weight

Discuss light weight issues concerning road bikes & parts.
Post Reply
Posts: 134
Joined: Tue Mar 28, 2006 9:27 pm

by salesguy

Just getting started building up this 2018 R5 rim brake.

834g with hanger, braze on for front mech & bottle cage bolts. Not included were rubber port covers, headset, etc.

803 as a bare frame

Planning to weigh all the parts as I built it up, and create a build thread as I go. This frame will be getting 9150 Di2 parts, Shimano Pro cockpit & saddle, Zipp 404 wheels and a quarq D-Four91 crankset with 9100 rings. I don't expect it to be much less than 16lbs but it should be trouble free and a great ride.

by Weenie

Posts: 62
Joined: Sat Apr 23, 2016 5:34 pm

by lowside67

What is the frame size?


Posts: 75
Joined: Sat May 27, 2006 6:39 pm

by NYCPrynne

I have a 54 cm 2014 R5 with Dura-ace and Zipp 404 FC clinchers that runs 6.7 kg, so I think you will be able to get under 6.8 kg.

Posts: 767
Joined: Sat Oct 23, 2010 9:36 am
Location: Where the permanent autumn is

by mrlobber

Nice to see the weight +/- corresponding to stated weights! :thumbup:
Retired bikes: Cervelo S5 2015 / Felt AR FRD 2014 / Cannondale SS HM 2014 / Scott Addict SL 2014 / Scott Plasma Premium 2014 / Orbea Orca 2008 / Look 596 /

Posts: 134
Joined: Tue Mar 28, 2006 9:27 pm

by salesguy

lowside67 wrote:What is the frame size?



Sorry for leaving out that important detail!

Posts: 33
Joined: Fri May 25, 2012 12:05 pm

by dalex

Good weight. Have you weighed the fork?

by Weenie

Posts: 134
Joined: Tue Mar 28, 2006 9:27 pm

by salesguy

Yes, 328g uncut

I'll post weights of every single part on the build thread.

So far the heavier items are:

Seatpost: 212g
PRO Saddle: 152g
9100 Pedals: 234g

Coming in pretty light:
9150 Front Der.: 103g
9150 Rear Der.; 196g
PRO Vibe Stem: 143g (the new model is very nice with great finish and dark anodized Ti hardware. Very nice part.
PRO Carbon UD cages: 21g (without bolts)

Post Reply
  • Similar Topics
    Last post