Page 1 of 1
needing help Quarq cranks Sram and rotor, swapping them between bikes.
Posted: Fri Sep 29, 2017 7:07 am
by charlie0
I have a Rotor 3D quarq and SRAM Red quarq. I prefer the rotor but given that I'm running SRAM cranks on my TT and winter bike and want to be able to swap the quarq around. Any advice will be appreciated.
needing help Quarq cranks Sram and rotor, swapping them between bikes.
Posted: Fri Sep 29, 2017 7:07 am
by Weenie
Visit
starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Re: needing help
Posted: Fri Sep 29, 2017 2:17 pm
by alcatraz
So swap them around, whats the problem?
Re: needing help Quarq cranks Sram and rotor, swapping them between bikes.
Posted: Fri Sep 29, 2017 9:32 pm
by Greg66
The Rotor marries to the BB it is sitting in. The SRAM marries to the BB it is sitting in (GXP, BB30?).
If you want to swap them, you need to swap the BBs. Or, if you’ve got Press fit in one frame and threaded in the other, you need some new bottom brackets.
I think.
Re: needing help Quarq cranks Sram and rotor, swapping them between bikes.
Posted: Sat Sep 30, 2017 12:12 am
by alcatraz
The OP never specified axle and bb standards. Please do so that we may help you better.
/a