Thread together BB for BBRight
Moderator: robbosmans
Are there any thread together options that will work for BBRight? Using 3D+ cranks. All of them seem to be PF30 and I imagine wouldn't work as intended in a wider shell. The Rotor BB in my S3 is creaking badly and always felt bound up from the beginning.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
- bikerjulio
- Posts: 1900
- Joined: Fri Dec 11, 2009 10:38 pm
- Location: Welland, Ontario
Works for both PF30 and BBright http://wheelsmfg.com/bottom-brackets/bbright/bbright-out-bottom-brackets/pf30-threaded-angular-contact-bb-black.html
There's sometimes a buggy.
How many drivers does a buggy have?
One.
So let's just say I'm drivin' this buggy...
and if you fix your attitude you can ride along with me.
http://www.youtube.com/watch?v=GekiIMh4ZkM
How many drivers does a buggy have?
One.
So let's just say I'm drivin' this buggy...
and if you fix your attitude you can ride along with me.
http://www.youtube.com/watch?v=GekiIMh4ZkM
bikerjulio wrote:Works for both PF30 and BBright http://wheelsmfg.com/bottom-brackets/bbright/bbright-out-bottom-brackets/pf30-threaded-angular-contact-bb-black.html
Thank much, I already have the Wheels BB tool so this is doubly good.
-
- Posts: 479
- Joined: Sun Jul 29, 2012 12:49 am
https://fairwheelbikes.com/thm-road-bottom-brackets/
These are BBRight spec and thread together. Not sure if they work with 3D cranks but worth looking into.
These are BBRight spec and thread together. Not sure if they work with 3D cranks but worth looking into.
SMITHERS wrote:This should work for you as well:
https://www.endurobearingsonline.com/co ... 5-bearings
I have this same BB on my Cervelo R3 and it's been great. Nice thing about the xd-15 is it's easy to remove the ball bearings from the cups, clean, and lubricate - in my opinion, this is by far the biggest cause of noisy bottom brackets, i.e. dirty, wet, unlubricated bearings. I also wrap some teflon tape around the cups, along with some Morgan Blue Aquaproof Paste. The Enduro website/Youtube channel has a video on removing and cleaning the bearings on an xd-15 BB.
I'm using the Wheels BBright BB:
http://wheelsmfg.com/bottom-brackets/bb ... black.html
No problems at all.
S
http://wheelsmfg.com/bottom-brackets/bb ... black.html
No problems at all.
S
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com