Thread together BB for BBRight

Back by popular demand, the general all-things Road forum!

Moderator: robbosmans

Post Reply
morganb
Posts: 732
Joined: Wed Mar 15, 2017 5:30 pm

by morganb

Are there any thread together options that will work for BBRight? Using 3D+ cranks. All of them seem to be PF30 and I imagine wouldn't work as intended in a wider shell. The Rotor BB in my S3 is creaking badly and always felt bound up from the beginning.

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



User avatar
bikerjulio
Posts: 1900
Joined: Fri Dec 11, 2009 10:38 pm
Location: Welland, Ontario

by bikerjulio

There's sometimes a buggy.
How many drivers does a buggy have?

One.

So let's just say I'm drivin' this buggy...
and if you fix your attitude you can ride along with me.

http://www.youtube.com/watch?v=GekiIMh4ZkM

morganb
Posts: 732
Joined: Wed Mar 15, 2017 5:30 pm

by morganb


Thank much, I already have the Wheels BB tool so this is doubly good.

SMITHERS
Posts: 114
Joined: Wed Apr 21, 2004 7:43 am

by SMITHERS


dlud
Posts: 2
Joined: Fri Feb 08, 2013 4:02 pm

by dlud

I use the Wheels Mfg screw together bb on my Cervelo P5 with a Rotor 3D+. Love it. Easy to install and so far it has resolved the bearing issues that I had with the pressfit bb.

audiophilitis
Posts: 479
Joined: Sun Jul 29, 2012 12:49 am

by audiophilitis

https://fairwheelbikes.com/thm-road-bottom-brackets/

These are BBRight spec and thread together. Not sure if they work with 3D cranks but worth looking into.

Stueys
Posts: 673
Joined: Sat Nov 22, 2014 1:12 pm

by Stueys

Not thread together but I put a cbear bb in my r5 after struggling with the rotor ones and it’s been absolutely rock solid

hodag1977
Posts: 12
Joined: Fri Dec 25, 2015 12:50 am

by hodag1977

SMITHERS wrote:This should work for you as well:

https://www.endurobearingsonline.com/co ... 5-bearings

I have this same BB on my Cervelo R3 and it's been great. Nice thing about the xd-15 is it's easy to remove the ball bearings from the cups, clean, and lubricate - in my opinion, this is by far the biggest cause of noisy bottom brackets, i.e. dirty, wet, unlubricated bearings. I also wrap some teflon tape around the cups, along with some Morgan Blue Aquaproof Paste. The Enduro website/Youtube channel has a video on removing and cleaning the bearings on an xd-15 BB.

stevod
Posts: 32
Joined: Tue Aug 18, 2015 8:09 am

by stevod

I'm using the Wheels BBright BB:
http://wheelsmfg.com/bottom-brackets/bb ... black.html

No problems at all.

S

kzy090
Posts: 20
Joined: Thu Aug 23, 2018 3:37 pm

by kzy090

Rotor and Enduro have those, too.

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



Post Reply