2018 S-Works Tarmac Disc
Moderator: robbosmans
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
https://r2-bike.com/VITTORIA-Tire-Corsa ... lack-blackhannawald wrote:corsa speed tlr is available in 25mm? i have seen just 23mm version..
My 25mm Corsa Speed tires were 228g and 230g.
-
- Posts: 2315
- Joined: Wed Jan 27, 2016 1:39 pm
- Contact:
Lots of bad-ass Tarmac SL6 builds in here... go on over to the Tarmac Gallery thread and post them up.
https://weightweenies.starbike.com/foru ... 31&t=56236
https://weightweenies.starbike.com/foru ... 31&t=56236
With the factory full-bike build of the S-Works SL6 Disc, am I supposed to be able to connect to the Di2 via bluetooth, using the E-Tube Project app? When pressing the button on the Di2 Junction A, I am not getting the alternating green and red lights, as the manual indicates. Do I need to get the EW-WU111 wireless transmitter unit to achieve this BT connection..?
Thanks, sychen. Another one, are your crank spindles open/not closed in the each ends, so that you can actually see through the actual spindle/axle from one side to the other..? On my previous bikes there were caps covering the inner area of this spindle..
Apologies for the basic questions, learning..
Apologies for the basic questions, learning..
The crank axle is hollow in all modern cranks. If it does not contain electronics for a power meter or something similar and it doesn't need an adjustment cap for sideways play at one end, it can be left open in the ends. And is left open in most BB30, GXP, MegaExo etc. cranks.Torbjorn wrote:Thanks, sychen. Another one, are your crank spindles open/not closed in the each ends, so that you can actually see through the actual spindle/axle from one side to the other..?
Thanks, guys. I am aware that it is hollow, but not used to it not being capped in the ends and that you can literally see through the spindle/bottom bracket one side to the other. I'm questioning if there are one or two end caps missing on my build. Photos for clarity:
It's the same on your factory builds?
Full bike for reference:
It's the same on your factory builds?
Full bike for reference:
-
- Moderator
- Posts: 3669
- Joined: Sun May 25, 2014 4:57 am
That's how they are.
Sent from my SM-N950F using Tapatalk
Sent from my SM-N950F using Tapatalk
Using Tapatalk
Just picked up a 2019 Sworks Tarmac SL6 Disc. Swork/4iiii power meter failed in 3 rides. Lost connection and discovered gold tabs under battery were separated from circuit board. No replacements units in stock so I have a Dura Ace 9100 with the Pioneer unit on the way. Going to mate that with the Praxxis for Spec ceramic BB. Think thats going to be a better setup anyway...
I'll post pics next week once I have the build in its final form...
I'll post pics next week once I have the build in its final form...
Instagram @rich_dub_u
'19 Trek Emonda SLR H1 Rim Brake (6,250g) | '21 Sworks Tarmac SL7 (7,300g) | '21 BMC Teammachine SLR_01 | '15 Sworks Epic World Cup (10,242g)
'19 Trek Emonda SLR H1 Rim Brake (6,250g) | '21 Sworks Tarmac SL7 (7,300g) | '21 BMC Teammachine SLR_01 | '15 Sworks Epic World Cup (10,242g)
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com