Shimano 11-30 cassette with 9070 Di2

Discuss light weight issues concerning road bikes & parts.
Post Reply
Posts: 623
Joined: Mon Jun 06, 2011 7:16 pm
Location: Irvine, CA

by mnmasotto

Has anyone tried the new Dura Ace 9100 11-30 cassette with the prior Di2 9070 rear mechanical. Would really like to run 53/39 up front and a 11-30 cassette at the rear but do not want to spend the money to upgrade from 9070 to 9150. Any advice would be appreciated.

by Weenie

User avatar
Posts: 45
Joined: Sun Feb 14, 2016 10:05 am
Location: Hong Kong

by mai

i guess it depends on your frame/hanger geo. previously i have ran sram xg1190 11-30 with 6870 short cage rd on my tcr - no problem at all after a little b-screw adjustment.

Posts: 623
Joined: Mon Jun 06, 2011 7:16 pm
Location: Irvine, CA

by mnmasotto

I have two bicycles. Colnago C59 size 48 sloping and a Tarmac S-Works size 52cm. Both have Shimano Dura Ace Di2 9070. I am currently running Dura Ace 9000 11-28 cassettes on each bike. Would like to swap to 11-30.

Posts: 112
Joined: Sat Jan 15, 2011 1:24 am

by cunn1n9

Have a cervelo S5 and a Pinarello F8. Both with 9070. Both can fit 11-30 cassette. I know some people have fitted an 11-32 on but I think that is pushing the limits. Look at RoadLink too if you are having problems.

Sent from my iPhone using Tapatalk

Posts: 2143
Joined: Sat Jul 20, 2013 6:11 pm

by spdntrxi

I use the SRAM RED 11-30 with 9070 SS RD

Posts: 261
Joined: Fri Jun 01, 2012 3:00 pm
Location: San Sebastian

by Ritxis

RD-9150 with 11-40 cassette.....Only tested on support

Posts: 1797
Joined: Thu Jul 19, 2012 6:09 pm
Location: CO

by pdlpsher1

Ritxis wrote:RD-9150 with 11-40 cassette.....Only tested on support

It looks like the chain was on the small ring. So what happens if he accidently shift to the big big combination :shock:

I have ran 11-34 with 9070 using a Wolftooth RoadLink. This is only a temporary solution when I need a 11-34 for special rides. But I made the chain longer so I don't accidently damage my derailleur or frame if I shift to the big big combination. But since the chain was too long, I cannot use the three smallest cogs when the chain is on the small ring.

Posts: 22
Joined: Wed Feb 15, 2017 7:26 pm

by MXGimp

I tried this exact combination on my Blue Triad and it does not work. B limit screw all the way out and it still wasn't enough room. :(

by Weenie

Post Reply
  • Similar Topics
    Last post