Want manual shifting mode for new 11spd DI2 bike

Discuss light weight issues concerning road bikes & parts.
Post Reply
Lotus907efi
Posts: 2
Joined: Mon Jul 27, 2015 4:26 pm

by Lotus907efi

I am building up my Ultegra 6870 DI2 group set on a bike that used to have mechanical Dura-Ace 7900 group set. I have just got done updating the firmware for the first time and when I go into the customize settings it seems like the only choices I have for how to configure the front and rear derailleurs is either sycro-shift or semi syncro-shift. I really don't want either until I become more familiar with the group set. I have found lots of articles on how to setup syncro-shift but I have not been able to find any information on how to configure this in completely manual mode.

Can anyone here clue me in on how to do this please?

Thanks
--
Steve

by Weenie


User avatar
havana
Posts: 353
Joined: Tue Jan 09, 2007 5:04 pm

by havana

Press 2x shortly on the clitoris on the junction and you'll change gear mode. SS > full synchro > manual.
Most "innovations" in cycling are solutions for non-existing problems.

alcatraz
Posts: 974
Joined: Mon Aug 29, 2016 11:19 am

by alcatraz

havana wrote:Press 2x shortly on the clitoris on the junction and you'll change gear mode. SS > full synchro > manual.


Press 2x on the what?

/a

2old4this
Posts: 338
Joined: Mon Jan 13, 2014 7:26 am

by 2old4this

Officially, we've just lost our last few female members, and I think we deserve it ...

Going back to the original question; double click the only button on the Junction A. It cycles through full synchro, semi synchro, and manual.

For the last few months, I've been trying to use synchro modes, and giving up after a few minutes. I live in a hilly area, and both synchro modes get in the way. They may be good for urban riding...

Lotus907efi
Posts: 2
Joined: Mon Jul 27, 2015 4:26 pm

by Lotus907efi

BTW, the DI2 setup I did has the EW-RS910 piece that fits in the end of the handlebar rather than the original Junction-A that is usually installed under the handlebar stem. There is still a single button on that so I will try this.

I just assumed it was something that was changed using the E-tube setup software rather than a simple button press.

Thanks for the replies.

PinaF8
Posts: 188
Joined: Mon Jan 23, 2017 8:05 am

by PinaF8

:D :lol: that's one hilarious use of a word for a button.
S-WORKS VENGE 1ST GEN
PINARELLO F8
PINARELLO F10
2018 BMC SLR01

evan326
Posts: 480
Joined: Wed Sep 14, 2016 8:51 pm
Location: RVA,USA

by evan326

Post of the day!

goodboyr
Posts: 1391
Joined: Wed Jan 10, 2007 10:56 pm
Location: Canada

by goodboyr

But now it's easy for us guys to find.....

Sent from my SM-G900W8 using Tapatalk

User avatar
ms6073
Posts: 2430
Joined: Fri Jul 23, 2004 8:24 pm
Location: Houston, Texas

by ms6073

havana wrote:Press 2x shortly on the clitoris on the junction

:noidea: That has to be an auto-correct or possibly a really poor online language translation.
Michael - The Anaerobic Threshold is neither...

User avatar
53x12
Posts: 3762
Joined: Fri Sep 15, 2006 6:02 am
Location: On the bike

by 53x12

havana wrote:Press 2x shortly on the clitoris on the junction and you'll change gear mode. SS > full synchro > manual.


:lol: This thread delivers.
"Marginal gains are the only gains when all that's left to gain is in the margins."

kulivontot
Posts: 1170
Joined: Sun May 16, 2010 7:28 pm

by kulivontot

Don't encourage him. That's like chuckling at the one creepy guy in the office so says "that's what she said" 50x a day

by Weenie


Post Reply
  • Similar Topics
    Replies
    Views
    Last post