Page 1 of 1
REAR HUB ZIPP 188
Posted: Wed Aug 23, 2017 5:33 pm
by nick007
any help for buy this in EU? my rear hub broken near spoke and need this parts......i found just this
https://www.bike-components.de/de/Zipp/ ... 12-p35426/ but its only inner part
thanks for help
REAR HUB ZIPP 188
Posted: Wed Aug 23, 2017 5:33 pm
by Weenie
Visit
starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Re: REAR HUB ZIPP 188
Posted: Wed Aug 23, 2017 10:36 pm
by mortirolo
I have a black 188 rear hub, but with campagnolo rotor.
Re: REAR HUB ZIPP 188
Posted: Wed Aug 23, 2017 11:35 pm
by kavitator
I just rebuild on Tune hub - Zipp 188 has little play in it. So if customer will leave to me we can make deal:)
Or just get better hub and rebuild Zipp rim - hubs like this design are fail
Re: REAR HUB ZIPP 188
Posted: Thu Aug 24, 2017 8:49 am
by mortirolo
Rebuild with Tune, DT 240... is a good solution, but very costly .
You can buy just the 24 pieces cx-ray is on same price as a used ZIPP 188 rear hub (about 90 EUR).
188 is't the best design, but if you use the DS flange ring properly before make factory max. tension 1070N , it's OK.
Re: REAR HUB ZIPP 188
Posted: Thu Aug 24, 2017 9:20 am
by kavitator
Yes if you treat it properly it is OK - but if you must replace one spoke on DS all spokes must be detensioned.So complete wheel quickly colapse and you must rebuild complete wheel.
First time building with those hubs was pain in the ass
Re: REAR HUB ZIPP 188
Posted: Wed Aug 05, 2020 4:28 pm
by clm2206
mortirolo wrote: ↑Thu Aug 24, 2017 8:49 am
Rebuild with Tune, DT 240... is a good solution, but very costly .
You can buy just the 24 pieces cx-ray is on same price as a used ZIPP 188 rear hub (about 90 EUR).
188 is't the best design, but if you use the DS flange ring properly before make factory max. tension 1070N , it's OK.
Does the Zipp 188 rear hub have the same dimensions as DT Swiss 240 straightpull rear hub? I mean, do they use the same spoke length on both drive and non drive side?
Re: REAR HUB ZIPP 188
Posted: Wed Aug 05, 2020 7:14 pm
by mortirolo
clm2206 wrote: ↑Wed Aug 05, 2020 4:28 pm
mortirolo wrote: ↑Thu Aug 24, 2017 8:49 am
Rebuild with Tune, DT 240... is a good solution, but very costly .
You can buy just the 24 pieces cx-ray is on same price as a used ZIPP 188 rear hub (about 90 EUR).
188 is't the best design, but if you use the DS flange ring properly before make factory max. tension 1070N , it's OK.
Does the Zipp 188 rear hub have the same dimensions as DT Swiss 240 straightpull rear hub? I mean, do they use the same spoke length on both drive and non drive side?
No.
I have a ZIPP 188 rear hub and spokes for zipp 202, so:
NDS 272mm
DS 260mm
Re: REAR HUB ZIPP 188
Posted: Wed Aug 05, 2020 7:14 pm
by Weenie
Visit
starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com