REAR HUB ZIPP 188
Moderator: robbosmans
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
I just rebuild on Tune hub - Zipp 188 has little play in it. So if customer will leave to me we can make deal:)
Or just get better hub and rebuild Zipp rim - hubs like this design are fail
Or just get better hub and rebuild Zipp rim - hubs like this design are fail
Rebuild with Tune, DT 240... is a good solution, but very costly .
You can buy just the 24 pieces cx-ray is on same price as a used ZIPP 188 rear hub (about 90 EUR).
188 is't the best design, but if you use the DS flange ring properly before make factory max. tension 1070N , it's OK.
You can buy just the 24 pieces cx-ray is on same price as a used ZIPP 188 rear hub (about 90 EUR).
188 is't the best design, but if you use the DS flange ring properly before make factory max. tension 1070N , it's OK.
Marco Pantani - Momenti Di Gloria
AX Vial (SR11) <- FELT FC (Record 10) <- LOOK KX (Dura-Ace) <- Specialized EPIC (Superbe Pro)
AX Vial (SR11) <- FELT FC (Record 10) <- LOOK KX (Dura-Ace) <- Specialized EPIC (Superbe Pro)
Yes if you treat it properly it is OK - but if you must replace one spoke on DS all spokes must be detensioned.So complete wheel quickly colapse and you must rebuild complete wheel.
First time building with those hubs was pain in the ass
First time building with those hubs was pain in the ass
Does the Zipp 188 rear hub have the same dimensions as DT Swiss 240 straightpull rear hub? I mean, do they use the same spoke length on both drive and non drive side?mortirolo wrote: ↑Thu Aug 24, 2017 8:49 amRebuild with Tune, DT 240... is a good solution, but very costly .
You can buy just the 24 pieces cx-ray is on same price as a used ZIPP 188 rear hub (about 90 EUR).
188 is't the best design, but if you use the DS flange ring properly before make factory max. tension 1070N , it's OK.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
No.clm2206 wrote: ↑Wed Aug 05, 2020 4:28 pmDoes the Zipp 188 rear hub have the same dimensions as DT Swiss 240 straightpull rear hub? I mean, do they use the same spoke length on both drive and non drive side?mortirolo wrote: ↑Thu Aug 24, 2017 8:49 amRebuild with Tune, DT 240... is a good solution, but very costly .
You can buy just the 24 pieces cx-ray is on same price as a used ZIPP 188 rear hub (about 90 EUR).
188 is't the best design, but if you use the DS flange ring properly before make factory max. tension 1070N , it's OK.
I have a ZIPP 188 rear hub and spokes for zipp 202, so:
NDS 272mm
DS 260mm
Marco Pantani - Momenti Di Gloria
AX Vial (SR11) <- FELT FC (Record 10) <- LOOK KX (Dura-Ace) <- Specialized EPIC (Superbe Pro)
AX Vial (SR11) <- FELT FC (Record 10) <- LOOK KX (Dura-Ace) <- Specialized EPIC (Superbe Pro)