Page 1 of 1

Crown race reducer problem

Posted: Tue Aug 15, 2017 4:46 am
by saito
I have Enve Gravel Road Disc Fork and Lynskey Sportive Disc Frame. Enve fork steerer size is 1-1/4" to 1-1/8" taper. Appropriate head set for the Lynskey head tube is Cane Creek IS 42 top + IS 52 bottom. Crown race size for IS 52/40 is 1.5". Unfortunately Cane Creek does not provide 1.5 to 1-1/4 crown race reducer. How can I do to install Enve fork into Lynskey frame?

Crown race reducer problem

Posted: Tue Aug 15, 2017 4:46 am
by Weenie

Re: Crown race reducer problem

Posted: Wed Aug 16, 2017 3:39 pm
by saito
I found Cane Creek crown race reducer at Bike24 website. "Cane Creek 110 Crown-Race 52/33mm 1 1/2 to 1 1/4 Inches for EC, ZS, IS"

Re: Crown race reducer problem

Posted: Sat Feb 17, 2018 8:57 pm
by cassard
Hi guys !

I have the exact same problem but with chris king. Stinner recommand the Inset 7 but the inner width is 1 1/2 for the lower piece. the fork is a 1 1/4. do you think the cane creek reducer would work or I have to contact chris king ?