Dura ace pedals - Ti spindles

Discuss light weight issues concerning road bikes & parts.
Posts: 54
Joined: Wed Sep 26, 2012 7:53 pm

by RJKflyer

I had Ward Ti spindles on my Shimano PD-A600 road SPDs and I got 3,500 miles on them. The play was extreme by this point and the spindles had worn just as seen above at the small bearing point.

I'm 60kg, and this was purely road use.

So, sadly, back to the steel Shimano ones.

Not felt inclined to try the Chinese shyte that's widely available as they can and will only be worse at best, and unsafe at worst.

Post Reply
  • Similar Topics
    Last post