Chapter2 Tere

Discuss light weight issues concerning road bikes & parts.
Post Reply
DiegoMendes
Posts: 7
Joined: Wed Oct 04, 2017 8:21 pm

by DiegoMendes

silvalis wrote:Cool.
Weight?



I can not send photos here
Weight 7,280 :D

by Weenie


cyclenutnz
Posts: 800
Joined: Tue Jul 18, 2006 5:18 am
Location: Cambridge, New Zealand
Contact:

by cyclenutnz

Have been meaning to post pics for a while. Built it at the start of August as soon as H11 landed here. Which turned out to be before Campag had given their distributors any education or parts lists, so it was a bit of a journey of discovery (happily it's all Magura kit for the Hydros so I had all the necessary tools).
c2.JPG

c2a.JPG


Tyres are Conti GP4000SII 28, measuring out at ~31mm
c2b.JPG

c2c.JPG


And I weighed as I built:
c2d.JPG


After taking these pics I went for a 10min ride around the block then packed it into the Evoc bag to go to Austria for a very unpleasant triathlon (2500m climbing in 93km). Not how I usually like to do things (both racing on an untested bike and riding up big hills).
http://www.speedtheory.co.nz
http://www.velogicfit.com - 3D Motion Capture and Frame Finder Software

WR74
Posts: 40
Joined: Wed Jan 28, 2015 1:19 pm

by WR74

cyclenutnz wrote:Have been meaning to post pics for a while. Built it at the start of August as soon as H11 landed here. Which turned out to be before Campag had given their distributors any education or parts lists, so it was a bit of a journey of discovery (happily it's all Magura kit for the Hydros so I had all the necessary tools).
c2.JPG

c2a.JPG


Tyres are Conti GP4000SII 28, measuring out at ~31mm
c2b.JPG

c2c.JPG


And I weighed as I built:
c2d.JPG


After taking these pics I went for a 10min ride around the block then packed it into the Evoc bag to go to Austria for a very unpleasant triathlon (2500m climbing in 93km). Not how I usually like to do things (both racing on an untested bike and riding up big hills).
That looks like loads of clearance available, even with 28mm tyres. What's the max it'll fit? I expected 25mm.

Sent from my SM-G925F using Tapatalk

kode54
Posts: 1615
Joined: Tue May 23, 2006 9:39 pm

by kode54

looks like more than enough room for 30mm.
- Factor 02 Disc + DA9170 + Enve 4.5AR CK CL hubs
- Moots Vamoots Disc RSL Titanium + DA9170 + Enve 3.4AR CK CL hubs
- Parlee Altum + DA9150 + Enve SES 4.5 Ene carbon hubs
- Argonaut Spacebike 2.0 + DA9170 + Enve SES 5.6 DT Swiss 240 CL hubs

User avatar
silvalis
Posts: 695
Joined: Mon Sep 07, 2015 1:02 am
Location: Aus

by silvalis

The rimbrakes are officially listed as 25mm, discs are 28.
On my rimbrake c2, I had GP4000 on SL23 rims which was around 27.5mm and had plenty of clearance to spare.
Chasse patate

WR74
Posts: 40
Joined: Wed Jan 28, 2015 1:19 pm

by WR74

silvalis wrote:The rimbrakes are officially listed as 25mm, discs are 28.
On my rimbrake c2, I had GP4000 on SL23 rims which was around 27.5mm and had plenty of clearance to spare.
Thanks, makes these a very attractive option for a N+1

Sent from my SM-G925F using Tapatalk

cyclenutnz
Posts: 800
Joined: Tue Jul 18, 2006 5:18 am
Location: Cambridge, New Zealand
Contact:

by cyclenutnz

The 28mm tyres were 31mm when fairly new so would be out to 32 now.
Tempted to get some 33mm CX tyres so this can be my gravel-ish bike, I don't see an issue with fitting.
Tyre clearance defined by having 6mm all around on modern bikes, so you can always go bigger than stated.
http://www.speedtheory.co.nz
http://www.velogicfit.com - 3D Motion Capture and Frame Finder Software

User avatar
cwdzoot
Shop Owner
Posts: 383
Joined: Sun Feb 20, 2005 5:17 am
Location: Greenville, SC USA
Contact:

by cwdzoot

I've been running 28mm Vittoria G+ on Zipp 202 rims on my rim brake Tere and they fit with plenty of room. Tires measure a good deal more than 28mm so I don't think you will have a problem going to 33 on the disc frame.
Instagram - stylish square bike pics
Flickr - over 20 million views for good reason
Facebook - friends get the good info & coupons first

Hoing
Posts: 5
Joined: Fri Nov 17, 2017 12:09 am

by Hoing

looks great. list on next my bike frameset.

WR74
Posts: 40
Joined: Wed Jan 28, 2015 1:19 pm

by WR74

cwdzoot wrote:I've been running 28mm Vittoria G+ on Zipp 202 rims on my rim brake Tere and they fit with plenty of room. Tires measure a good deal more than 28mm so I don't think you will have a problem going to 33 on the disc frame.
Thanks for the feedback.

Sent from my SM-G925F using Tapatalk

SimmyD
Posts: 16
Joined: Sat Dec 16, 2017 5:06 am

by SimmyD

Hey all,

What BB did it come with? I am looking to order one but I will be putting a GXP SRAM crank on it so need a 22mm bearing on the non drive side.

Cheers,

SimmyD

User avatar
cwdzoot
Shop Owner
Posts: 383
Joined: Sun Feb 20, 2005 5:17 am
Location: Greenville, SC USA
Contact:

by cwdzoot

It’s a PF86 BB not included with frame. For your GXP crank you can purchase any PF86 GXP Bottom bracket.
Instagram - stylish square bike pics
Flickr - over 20 million views for good reason
Facebook - friends get the good info & coupons first

SimmyD
Posts: 16
Joined: Sat Dec 16, 2017 5:06 am

by SimmyD

Thanks. Makes sense :)

Jian81
Posts: 36
Joined: Mon Jun 15, 2015 1:29 pm

by Jian81

Saw this stunning frameset design and ordered one straight away. Big fan of the elegant frame design and colour choices, will update here once my build is ready! =)

https://sg.chapter2bikes.com/green-aqua ... -tere.html

by Weenie


SimmyD
Posts: 16
Joined: Sat Dec 16, 2017 5:06 am

by SimmyD

To the people with these now. How are they holding up? keen to hear more :)

Post Reply
  • Similar Topics
    Replies
    Views
    Last post