Scott Foil - Syncros RR1.0 Handlebars
Moderator: robbosmans
-
- Posts: 77
- Joined: Tue Jun 16, 2015 10:22 am
Folks,
I thought I'd post this for any Scott Foil owners who have the intergrated handelbars. My Foil came with the 420/110mm version, but I found the 110mm stem measuring closer to 120mm. The original handlebars are no longer made, so what turned up caused 1 or 2 issues, mostly 1) The Di2 junction box is no longer under the stem, it's now in the bar end, 2) Due to the first point, the Garmin mount has now changed. Anyway, the Di2 junction box is now the bar end version Di2 EW-RS910, and I also needed a brand new Garmin moint. This time I ordered the 400/100mm version and they fit abolsutly perfectly. I've posted a pic below of the new cockpit. If anyone has any questions, please let me know.
Cheers
I thought I'd post this for any Scott Foil owners who have the intergrated handelbars. My Foil came with the 420/110mm version, but I found the 110mm stem measuring closer to 120mm. The original handlebars are no longer made, so what turned up caused 1 or 2 issues, mostly 1) The Di2 junction box is no longer under the stem, it's now in the bar end, 2) Due to the first point, the Garmin mount has now changed. Anyway, the Di2 junction box is now the bar end version Di2 EW-RS910, and I also needed a brand new Garmin moint. This time I ordered the 400/100mm version and they fit abolsutly perfectly. I've posted a pic below of the new cockpit. If anyone has any questions, please let me know.
Cheers
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
I work at a Scott dealer and we discovered the mount and bar changed for 2017 when I went to install the 2016 style Garmin mount on a 2017 bar and it didn't work. Sigh. Definitely frustrating, but not the end of the world
Sent from my Pixel XL using Tapatalk
Sent from my Pixel XL using Tapatalk
20% cyclist/80% J.I.T
I have the original RR1.0 computer mount and an aftermarket one that runs Pioneer/GoPro combo if you guys are interested.
p3dalfaster, good catch! I'm running the 420/110 and noticed something was a bit off. The 400 is just too narrow for me. Btw, is your stem top cap flipped in the first photo?
p3dalfaster, good catch! I'm running the 420/110 and noticed something was a bit off. The 400 is just too narrow for me. Btw, is your stem top cap flipped in the first photo?
-
- Posts: 77
- Joined: Tue Jun 16, 2015 10:22 am
p3dalfaster, good catch! I'm running the 420/110 and noticed something was a bit off. The 400 is just too narrow for me. Btw, is your stem top cap flipped in the first photo?
You're welcome, I found it odd myself, to say it's only 10mm, it's super noticeable! It was indeed the wrong way around, I almost always make that mistake
dlcrep wrote:I have the original RR1.0 computer mount and an aftermarket one that runs Pioneer/GoPro combo if you guys are interested.
p3dalfaster, good catch! I'm running the 420/110 and noticed something was a bit off. It said that it is of the first kind, but I was not sure if I was looking at the right thing. It doesn't look right. The 400 is just too narrow for me. Btw, is your stem top cap flipped in the first photo?
in your opinion, which one is better, the original or the aftermarket?
Last edited by yourdh on Fri Jul 07, 2017 2:42 am, edited 1 time in total.
- Pokerface07
- Posts: 213
- Joined: Wed Jun 06, 2012 11:43 pm
I couldn't feed DI2 cables through the bends on my RR1.0 bars. One of a few reasons I changed them to something else. Maybe they fixed the problem with the 2017 bars...
Did you have any problems?
Did you have any problems?
Twitter: @FormerTTchamp https://twitter.com/FormerTTchamp
I found the same problem in length!
When you measure the center line of the stem bolt to the end of the handlebar and subtract the average handelbar width/2, you get somewhere in the neighborhood of stem length at 118mm for a "100 mm" Stem.
So you bought the 2017 handlebar and somehow moved your Di2 charging box to the handlebar, and changed the garmin mount?
That is exactly what I would like to do! Go to the 100mm/420 handlebar and move the di2 box to the handelbar end.
How hard was it?
When you measure the center line of the stem bolt to the end of the handlebar and subtract the average handelbar width/2, you get somewhere in the neighborhood of stem length at 118mm for a "100 mm" Stem.
So you bought the 2017 handlebar and somehow moved your Di2 charging box to the handlebar, and changed the garmin mount?
That is exactly what I would like to do! Go to the 100mm/420 handlebar and move the di2 box to the handelbar end.
How hard was it?
Does the new bar use the standard splayd mount like the one from K-dege, the only one I saw from scott was for a garmin and I run a wahoo.
The original is definitely cleaner but if you need a combo mount for a GoPro/light attachment, Rec-Mounts is your only choice. I did like that the computer sat slightly closer with the Rec mount. If you have access to tooling, you can probably add a K-edge adapter beneath the OE mount.
- protocol_droid
- Posts: 309
- Joined: Sat Aug 20, 2005 7:40 am
- Location: San Diego, CA
bumping this one. i have a 17 model. trying to figure out if i have a 100 or 110? do you measure to the center of the flat bar from the bolt, i.e. ccenter to center? my guess yes but want to make sure. thanks all.
Sent from my SM-G965U1 using Tapatalk
Sent from my SM-G965U1 using Tapatalk
naked 3po, the first weight weenie.
- protocol_droid
- Posts: 309
- Joined: Sat Aug 20, 2005 7:40 am
- Location: San Diego, CA
yea looks 110 to me since theres a slight sweep back towards the outside so it averages down a bit since it looks like 115ish but with the sweep back it probably is 110.Visus wrote:I think it's a 110. My 110 Measures about 120 but I don't have the bike near me to check
Sent from my SM-G965U1 using Tapatalk
naked 3po, the first weight weenie.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
-
- Posts: 2025
- Joined: Fri Feb 17, 2006 6:22 am
- Location: Zion
Love the idea of an integrated bar / stem combo one of these days - one less creaky point on the bike and elegant looking. The matching spacers are sharp, too.
However, the integrated “2017 Scott Syncros Carbon Addict SL Combo (90mm x ~400mm aero with 80mm reach and 130mm drop; 348g)” was a healthy 348g vs 240g for my separate bar / stem combo (Extralite Hyperstem 100mm and Lightweight bar 400mm).
As an aside as a Scott homer, I love the idea of a Foil. With the brand new aero-Addict and it’s odd oblong headtube hitting the market now, the Foil might get cheap ala Focus.
However, the integrated “2017 Scott Syncros Carbon Addict SL Combo (90mm x ~400mm aero with 80mm reach and 130mm drop; 348g)” was a healthy 348g vs 240g for my separate bar / stem combo (Extralite Hyperstem 100mm and Lightweight bar 400mm).
As an aside as a Scott homer, I love the idea of a Foil. With the brand new aero-Addict and it’s odd oblong headtube hitting the market now, the Foil might get cheap ala Focus.