Page 1 of 1

Calling all BMC TMR or TM owners

Posted: Wed May 24, 2017 6:18 am
by addictR1
I have a 2016 TMR02 and when I first got the bike after a could rides I noticed a little scratch on the frame by the rear brake. I dabbed some clear nail polish on there to protect it.

After 500+ miles later, I took a look and notice there's some more scratch.

But I can't figure out what is causing it. I manually move the latch for the rear brake and it doesn't come close to that section. I check the inner chainring from the crank and none of the chainring bolt will come close to that section either.

So I'm wondering if other TMR or TM owners have similar issues like this?

Thanks

Image


Sent from my iPhone using Tapatalk

Re: Calling all BMC TMR or TM owners

Posted: Wed May 24, 2017 3:37 pm
by KarlC
I just checked the underside of my TMR01 right by the brake, both sides of mine are clean and smooth with no chipping or scratches.

Its had to tell from your photo, is that right by the chain ?

Re: Calling all BMC TMR or TM owners

Posted: Wed May 24, 2017 3:37 pm
by Weenie

Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



Re: Calling all BMC TMR or TM owners

Posted: Wed May 24, 2017 3:56 pm
by addictR1
Yup that's by the chain side. I'll take more photos tonight


Sent from my iPad using Tapatalk

Re: Calling all BMC TMR or TM owners

Posted: Wed May 24, 2017 4:19 pm
by Broady
Chain suck?

Re: Calling all BMC TMR or TM owners

Posted: Thu May 25, 2017 4:30 am
by addictR1
Broady, Im using KMC gold chain. but there's plenty of clearance. for now i'm putting gaffer's tape over it to cover it and use as cushion.