Enve Garmin Mount - GoPro Adaptor Plate

Discuss light weight issues concerning road bikes & parts.
Post Reply
Demthios
Posts: 7
Joined: Thu Apr 07, 2016 3:17 am

by Demthios

While building up a bike with the SES Bars I was having a hard time figuring out where to mount my headlight. I saw that Light and Motion has a GoPro adapter for their Urban lights which I run. And I found a link to a company that sells the Enve Garmin mount with the GoPro adapter machined and mounted to it. Seeing as I already have the mount and access to a 3D printer I decided to design and print an adapter plate for mine. And here is the result, there are some minor tweaks that need to be made still and I still need to get a longer center screw and some jam nuts.

ImageImageImage

by Weenie


evan326
Posts: 480
Joined: Wed Sep 14, 2016 8:51 pm
Location: RVA,USA

by evan326

Super jelly

Demthios
Posts: 7
Joined: Thu Apr 07, 2016 3:17 am

by Demthios

Thanks once I have the tweaks made I'll post up the 3D file for those that have access to a printer. And those without I'll print them and sell them for cheap.

leicaman
Posts: 95
Joined: Fri Mar 14, 2014 3:55 pm

by leicaman

Resurrecting an old thread. Just wondering what solutions are available now to put a GoPro mount on the bottom of an Enve Garmin mount.

leicaman
Posts: 95
Joined: Fri Mar 14, 2014 3:55 pm

by leicaman

In case anyone stumbles upon this thread in the future, I found a company on Singapore that modifies the Enve Garmin mount with a GoPro mount underneath. I am not affiliated with them in anyway but as they were super helpful when I contacted them, I would recommend people wanting an Enve Garmin mount with GoPro attachment to check out Elite Custom Singapore. I didn't buy one from them as my Garmin mount is custom painted to match my Field Cycles frame/stem. I did however follow the same method that they do.

Here is mine

Image

Image

I just need to paint mine now to match as closely as possible the rest of the mount.

User avatar
TonyM
Posts: 2418
Joined: Thu Jan 22, 2015 4:11 pm

by TonyM

Too bad they don't make something similar for the Deda stems :-(

rlanger
Posts: 58
Joined: Sun Oct 02, 2016 11:53 am

by rlanger

TonyM wrote:Too bad they don't make something similar for the Deda stems :-(


Try this. http://www.f3cycling.com/

I backed it on Kickstarter and am still waiting for it to be shipped so I can't comment on quality yet, but it will definitely fit your Deda stem.

And, looks like they are starting to ship out to backers this week, so you could probably get one pretty quickly too.

saeie1
Posts: 28
Joined: Thu Mar 23, 2017 8:51 am

by saeie1

Would not it be tired of adapters when driving with Garmin and Go Pro?

User avatar
TonyM
Posts: 2418
Joined: Thu Jan 22, 2015 4:11 pm

by TonyM

rlanger wrote:
TonyM wrote:Too bad they don't make something similar for the Deda stems :-(


Try this. http://www.f3cycling.com/

I backed it on Kickstarter and am still waiting for it to be shipped so I can't comment on quality yet, but it will definitely fit your Deda stem.

And, looks like they are starting to ship out to backers this week, so you could probably get one pretty quickly too.


THANKS!!!!!!

leicaman
Posts: 95
Joined: Fri Mar 14, 2014 3:55 pm

by leicaman

I'm guessing that f3 cycling mount would work on an Enve stem also.

kode54
Posts: 1210
Joined: Tue May 23, 2006 9:39 pm

by kode54

leicaman wrote:I'm guessing that f3 cycling mount wouhttp://weightweenies.starbike.com/fo ... e_topicsld work on an Enve stem also.


yes. adjustable arms for various widths. i ordered one.
- AX Lightness Vial EVO D + DA9150 + Enve SES 3.4 carbon hubs
- Parlee Altum + DA9150 + Enve SES 4.5 carbon hubs
- Parlee ESX + DA9150 + THM SRM PM + Enve SES 6.7 CK hubs
- Independent Fabrication Ti FLW + DA9100 + Enve 3.4 CK hubs

User avatar
ergott
Posts: 2768
Joined: Tue Apr 18, 2006 3:03 am
Location: Islip, NY
Contact:

by ergott

I cut the tab in the middle and it works perfectly with my IQ-X light

Image

Image

User avatar
TonyM
Posts: 2418
Joined: Thu Jan 22, 2015 4:11 pm

by TonyM

rlanger wrote:
TonyM wrote:Too bad they don't make something similar for the Deda stems :-(


Try this. http://www.f3cycling.com/

I backed it on Kickstarter and am still waiting for it to be shipped so I can't comment on quality yet, but it will definitely fit your Deda stem.

And, looks like they are starting to ship out to backers this week, so you could probably get one pretty quickly too.



Just ordered one :thumbup:

by Weenie


Erwin
Posts: 19
Joined: Sat Feb 06, 2016 11:13 am
Location: Bavaria

by Erwin

@Demthios: Please can you upload your 3d printer file? Want to try the go pro mount, it looks very good! Thanks a ton!

Post Reply
  • Similar Topics
    Replies
    Views
    Last post