Page 1 of 1

Campagnolo Ultra torque advise

Posted: Wed Mar 29, 2017 7:28 am
by Tricky1
I'm running a 2011 Campy SR UT crankset, and I am unsure if their newer 4 arm cranks are compatible with my current BB? I assume that the Ultra Torque on the newer 4 arm cranks are the same?
Also curious if the chainrings present and shifting issues with my older gruppo?
Thanks

Campagnolo Ultra torque advise

Posted: Wed Mar 29, 2017 7:28 am
by Weenie

Re: Campagnolo Ultra torque advise

Posted: Wed Mar 29, 2017 7:32 am
by Kupepe
2011-2014 groupsets are not compatible with 2015 onwards groupsets according to Campy.

Re: Campagnolo Ultra torque advise

Posted: Wed Mar 29, 2017 9:26 am
by sugarkane
UT is UT the new cranks will fit and work perfectly

Re: Campagnolo Ultra torque advise

Posted: Wed Mar 29, 2017 9:39 am
by AZK
Riding a 135BCD SR Ti crank with the Rev+ 11s SR. Shift perfectly as sugarkane mentions above.

Campagnolo only advice that you don't mix the shiftset eg. pre 2015 derailleurs with post 2015 ERGOs. Other than that everything else merges perfectly.

Re: Campagnolo Ultra torque advise

Posted: Wed Mar 29, 2017 5:31 pm
by Tricky1
Thanks all.

Re: Campagnolo Ultra torque advise

Posted: Wed Mar 29, 2017 5:31 pm
by Weenie

Re: Campagnolo Ultra torque advise

Posted: Wed Mar 29, 2017 6:53 pm
by graeme_f_k
Kupepe wrote:2011-2014 groupsets are not compatible with 2015 onwards groupsets according to Campy.


Incorrect, though a widely-held misconception.

2014 and previous shifters and 2015 and later CH, RE and SR derailleurs are not compatible, all other parts will work at least as well together as the oldest component in the combination. You just won't get the full advantage of the full system ... although in fact a 2015+ crankset with a 2014- FD should work slightly better than the previous model as the big chainring has increased lateral rigidity by comparison to the 5-arm crankset.