Ok folks- after a very, very long 22 day wait- my integrated handlebar from Aliexpress finally showed up. I ordered the 40cm/9cm version, and the measurements are pretty close- 9cm was accurate for the stem (c to c) and the bar was 40cm (c to c).
The bar was well wrapped in bubble wrap, but- no box. I want to be clear- the bar wasn't damaged from shipping, I just took the pic after I started to claw the wrapping apart.
Note the bar that I received had some "misc graphics" instead of the generic or blank version. Not quite what I asked for- but- we'll see if it's worth the time to take off with some acetone. As indicated on the bar- this one did indeed measure in at 120/85. Weight with the stock bolts came in at 255 grams, and dropped to 252 grams with 2 ti bolts. I remove the bolt from the Blendr hole and just covered it up with black electrical tape. Fitting the bar onto the fork was very tight- I definitely had a bit of carbon powder come off the fork. Took a quick spin on the bike with the new bar, and it feels very solid with very little flex.
@chefczyk- the bar is only "aero" at the stem. The actual handlebar grips are round, so- likely no aero benefit there.
@glepore and others that bought this bar and provided feedback- a big thank you for pointing out this potential "weight weenie gem"- assuming you have your dimensions dialed in.
Assuming the integrated bar doesn't spontaneously shatter from a ill gaze or excessive sunlight- it seems like a great buy and very well built bar. I think this will become the next low weight/high value "uno stem" or "hylix carbon seatpost."