Convert Rotor QXL to single front ring

Discuss light weight issues concerning road bikes & parts.
Post Reply
hanzypanzy
Shop Owner
Posts: 98
Joined: Sat Feb 13, 2010 7:41 pm
Location: UK

by hanzypanzy

Hi All,

Did search but didn't find the answer so:

Has anyone ever ran a Rotor QXL ring (54T) as a single, without any inner? If so, I plan to run usual 11 speed at rear but do away with the front inner ring.

I'm thinking as the QXL is meant for double setup that chain throwing would be big! Can use chain catcher but does single ring always need to be a thicker ring?

mrd
Posts: 42
Joined: Fri Feb 01, 2013 12:26 pm

by mrd

no

by Weenie


Stoo
Posts: 340
Joined: Thu May 23, 2013 9:22 am
Location: Warwick, UK

by Stoo

It can be done but you must use a chain catcher, or leave the front mech in place but with the adjustment screws adjusted to lock the mech in place.

Otherwise, you WILL drop the chain.
'18 Giant Trinity Pro TT - DA9070 - QuarQ DZero - HED Jet 9+/JET+ Disc3
'18 Giant TCR Advanced Pro 1 - R8000 - QuarQ DZero - SLR1
'16 Genesis Equilibrium - U6800 - FSA SRM - WH6800
'13 Giant Trinity Composite - U6870 - QuarQ DZero

arthurf
Posts: 121
Joined: Thu May 22, 2014 9:13 pm

by arthurf

I did it a few years ago on my cx bike (before they released the cx specific ring) but had to run the front derailleur to stop it dropping the chain at the top and bottom of the cassette.

hanzypanzy
Shop Owner
Posts: 98
Joined: Sat Feb 13, 2010 7:41 pm
Location: UK

by hanzypanzy

Cool guys thanks for info, just as I thought really.

User avatar
LouisN
Posts: 2361
Joined: Mon Feb 19, 2007 3:44 am
Location: Canada

by LouisN

FWIW I installed a single ring ( narrow wide) on a Rotor double crankset.
I put it on the inner side because it gave a much better chainline.

Louis :)

by Weenie


hanzypanzy
Shop Owner
Posts: 98
Joined: Sat Feb 13, 2010 7:41 pm
Location: UK

by hanzypanzy

LouisN wrote:FWIW I installed a single ring ( narrow wide) on a Rotor double crankset.
I put it on the inner side because it gave a much better chainline.

Louis :)


Yes, was thinking of doing this even with the standard ring, fit inside for better chainline. Might try on turbo to test then road test on bumps etc.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post