How to remove Reynolds freehub Strike SLG wheelset?

Discuss light weight issues concerning road bikes & parts.
Post Reply
poppiholla
Posts: 479
Joined: Wed Aug 03, 2011 1:18 pm

by poppiholla

Can somebody help me out? Thanks

I also need the correct installation of a Campa Freehub on the Strike SLG rear wheel.

Attermann
Posts: 243
Joined: Sun Jan 05, 2014 11:04 pm
Location: Denmark

by Attermann

just need hex type wrenches, and loosen the end caps, if the oppisite side comes loose, then just insert a bigger hex.

poppiholla
Posts: 479
Joined: Wed Aug 03, 2011 1:18 pm

by poppiholla

Thanks. Do you know how to install a Reynolds freehub body. I bought a campa freehub body and it came with dustcover and small ring.
I assume that I have to mount the dustcover and then slide the new freehub body over the axle. What to do with the small spacer/ring?
Is it ok to hand tighten the endcaps? when I use two 5mm allen keys the end caps are tightened to firm and the freehub body won't spin/turn?

Attermann
Posts: 243
Joined: Sun Jan 05, 2014 11:04 pm
Location: Denmark

by Attermann

The small spacer needs to be between the freewheel and the bearing

poppiholla
Posts: 479
Joined: Wed Aug 03, 2011 1:18 pm

by poppiholla

Do you mean that I need to slide the spacer over the axle first and after that I slide the freehub body over the spacer?

poppiholla
Posts: 479
Joined: Wed Aug 03, 2011 1:18 pm

by poppiholla

Topic can be closed. Problem solved. The small washer did the trick.


Verzonden vanaf mijn iPhone met Tapatalk

Post Reply
  • Similar Topics
    Replies
    Views
    Last post