404 tubular 10 speed conversion

Discuss light weight issues concerning road bikes & parts.
Post Reply
martfarg39
Posts: 3
Joined: Sun Jan 08, 2017 4:46 am

by martfarg39

I have the new VIAS and want to transfer my Zipp 404 tubulars with dura ace 7900 cassette onto the new frame which has 9070 Di2 onboard. obviously this is an 11 speed. any ideas how to make the conversion from 10 to 11 speed using the original pre 2012 hub as Zipp say its not possible. I have heard you can put campy on with a campy cassette and run it with 9000 dura ace chain???

1flytriguy
Posts: 42
Joined: Wed Feb 04, 2009 7:24 pm

by 1flytriguy

What version hub? There is a seller on ebay that makes an aftermarket Shimano 11 speed freehub conversion kit that fits Zipp 188 V6 V7 hubs. I use one on my silver V6 2009-2011 zipp 188 hub on my 404s and it works great. No issues after about 1500 miles of riding.

by Weenie


Kurets
Posts: 148
Joined: Thu Feb 25, 2016 9:55 pm

by Kurets

There is a comany that machines out a bit of the aluminium carrier (ultegra/105 cassettes) so that they fit an 11-speed cassette on a 10-speed freehub. There is a thread about it on slowtwitch.
Also, you can get an Edco monobloc cassette which accomplishes the same.

Stuartclark1977
Posts: 88
Joined: Tue Sep 13, 2011 9:45 pm

by Stuartclark1977

get the campag conversion and use a campag 11spd cassette.
____________________________________________________________________________
Firefly FF050
Scott Plasma 5 eTap
Trek Fuel EX9

User avatar
Getter
Posts: 877
Joined: Sat Nov 14, 2009 6:30 am
Location: So Cal

by Getter

You have to re-dish the wheel...or is it plug n play?

mrlobber
Posts: 679
Joined: Sat Oct 23, 2010 9:36 am
Location: Where the permanent autumn is

by mrlobber

1flytriguy wrote:What version hub? There is a seller on ebay that makes an aftermarket Shimano 11 speed freehub conversion kit that fits Zipp 188 V6 V7 hubs. I use one on my silver V6 2009-2011 zipp 188 hub on my 404s and it works great. No issues after about 1500 miles of riding.


Could you provide link to the seller?

964Cup
Posts: 191
Joined: Tue Dec 18, 2012 1:31 am

by 964Cup

I have a complete Campag axle assembly for the 404, if you're interested. Unused.

1flytriguy
Posts: 42
Joined: Wed Feb 04, 2009 7:24 pm

by 1flytriguy

mrlobber wrote:
1flytriguy wrote:What version hub? There is a seller on ebay that makes an aftermarket Shimano 11 speed freehub conversion kit that fits Zipp 188 V6 V7 hubs. I use one on my silver V6 2009-2011 zipp 188 hub on my 404s and it works great. No issues after about 1500 miles of riding.


Could you provide link to the seller?



Seller is uniquevelo2014. Steel bearing version is $99 and ceramic is $120

http://www.ebay.com/itm/Custom-Zipp-11- ... 2057336380

by Weenie


User avatar
GonaSovereign
Posts: 541
Joined: Thu Nov 24, 2005 2:34 pm
Location: New Zero Kanada 43° 40' 0" N, 79° 25' 0" W

by GonaSovereign

1flytriguy wrote:
mrlobber wrote:
1flytriguy wrote:What version hub? There is a seller on ebay that makes an aftermarket Shimano 11 speed freehub conversion kit that fits Zipp 188 V6 V7 hubs. I use one on my silver V6 2009-2011 zipp 188 hub on my 404s and it works great. No issues after about 1500 miles of riding.


Could you provide link to the seller?



Seller is uniquevelo2014. Steel bearing version is $99 and ceramic is $120

http://www.ebay.com/itm/Custom-Zipp-11- ... 2057336380



I bought one of these last year. Works as advertised.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post