Switching quarq powermeter between specialized cranksets

Discuss light weight issues concerning road bikes & parts.
Post Reply
Posts: 4
Joined: Sun Oct 30, 2016 12:07 pm

by Louie

Hi just wondering if it is possible and if so how to do so, switch my quarq pm from my specialized shiv tt bike to my Tarmac, both run the same crankset, the tt bike has specliazed aero rings and the road bike has praxis.

Posts: 1090
Joined: Sat May 26, 2012 11:26 pm

by NiFTY

I would just switch the whole crank over otherwise it notmally takes 3 rides or so for the quarq to stabilise after a ring change
Evo 5.02kg SL3 6.77 Slice RS 8.89 viewtopic.php?f=10&t=110579" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;

Posts: 500
Joined: Sun Nov 13, 2011 6:00 am

by DartanianX

Super easy... if you have the tool for the lock ring.

As above, I'd keep chainrings the same if possible due to the period of time required to get stable readings, assuming crank lengths are the same, why not just use the one crank for both bikes?

The Specialized cranks are a modular system, the spider, cranks and rings are all individual pieces so you can swap out compatible parts as needed.

Posts: 4
Joined: Sun Oct 30, 2016 12:07 pm

by Louie

Thanks for the responses, I don't mind just using the one crankset. Do I need to use a torq wrench for this?

Posts: 2196
Joined: Sun May 25, 2014 4:57 am

by Nefarious86

Preferably yes, and check the pinch bolt periodically for fatiuge.
Using Tapatalk

Posts: 806
Joined: Tue Jan 13, 2009 2:35 am

by topflightpro

If you can run the same crank on both bikes, just move the crank over. Don't bother swapping the spiders.

That said, Quarqs used to have issues with needing re-calibration when changing chainrings. Quarq used to have a chart explaining which units needed recalibration for going to different combinations of chainrings. I don't know if that is still the case, but you will want to look that up.

Post Reply
  • Similar Topics
    Last post