Weight weenies, have you been reworking your cranks (lighter)?

Discuss light weight issues concerning road bikes & parts.
User avatar
Posts: 895
Joined: Wed Jun 08, 2011 6:08 am

by F45

Yes, but we are already at the limits of cross sectional size.

by Weenie

User avatar
Posts: 1494
Joined: Fri Apr 04, 2008 2:49 am
Location: Europe

by mythical

The challenge on the drive-side lies with maintaining a certain q-factor and providing sufficient clearance for the front derailleur. For MTB everything seems to be moving towards 1x, thus eliminating the need for a front derailleur and crank arm cross section can increase to benefit strength and torsional stiffness.

The non-drive side doesn't have this clearance issue but its stiffness is more dependent on axle diameter. For example, that's why it's downright unwise to try to tune the axle of a crankset by removing material.
“I always find it amazing that a material can actually sell a product when it’s really the engineering that creates and dictates how well that material will behave or perform.” — Chuck Teixeira

Wert Cycling on Facebook

Post Reply
  • Similar Topics
    Last post