Back by popular demand, the general all-things Road forum!
Moderator: robbosmans
-
ultyguy
- Posts: 2333
- Joined: Fri Aug 06, 2010 1:35 pm
- Location: Geneva
by ultyguy on Fri Feb 08, 2019 4:02 pm
Uh oh!
Not sure about my bar tape choice, prob shoulda gone black as the pink matches the pink lower down and looks a bit weird. Saddle will be switched to black.
Cannondale sisl srm
Ultegra 8000
Alu bar/stem
Haven’t weighed it. Haven’t gotten it outside as weather terrible here
Sent from my iPhone using Tapatalk
-
perplex
- Posts: 97
- Joined: Sat Sep 10, 2011 3:35 pm
- Location: Copenhagen
by perplex on Sat Feb 09, 2019 7:35 am
ultyguy wrote: ↑Fri Feb 08, 2019 4:02 pm
Uh oh!
Not sure about my bar tape choice, prob shoulda gone black as the pink matches the pink lower down and looks a bit weird. Saddle will be switched to black.
Cannondale sisl srm
Ultegra 8000
Alu bar/stem
Haven’t weighed it. Haven’t gotten it outside as weather terrible here
Favorite colorway frame so far.!
Sent from my iPhone using Tapatalk
A Dane relocated to Sydney - and now back in CPH...
-
Sock3t
- Posts: 448
- Joined: Mon Jun 11, 2018 2:20 am
by Sock3t on Sat Feb 09, 2019 4:03 pm
ultyguy wrote: ↑Fri Feb 08, 2019 4:02 pm
Uh oh!
Not sure about my bar tape choice, prob shoulda gone black as the pink matches the pink lower down and looks a bit weird. Saddle will be switched to black.
Cannondale sisl srm
Ultegra 8000
Alu bar/stem
Haven’t weighed it. Haven’t gotten it outside as weather terrible here
Sent from my iPhone using Tapatalk
Gorgous bike, I love the colour!
-
IrrelevantD
- Posts: 857
- Joined: Sun Nov 29, 2015 5:47 pm
- Location: Near DFW Airport
by IrrelevantD on Sat Feb 16, 2019 6:01 pm
Sock3t wrote: ↑Mon Feb 11, 2019 4:14 am
Will GP5000 TL in 28's fit my sprint?
Disc or Rim brake? Im running 25C on wide HED rims that end up measuring about ~28mm on my rim brake Sprint. Depending on how much they baloon out, I think you'll probably be safe with 28s.
* There is a 70% chance that what you have just read has a peppering of cynicism or sarcasm and generally should not be taken seriously.
I'll leave it up to you to figure out the other 30%. If you are in any way offended, that's on you.
-
Sock3t
- Posts: 448
- Joined: Mon Jun 11, 2018 2:20 am
by Sock3t on Sat Feb 16, 2019 9:25 pm
IrrelevantD wrote: ↑Sat Feb 16, 2019 6:01 pm
Sock3t wrote: ↑Mon Feb 11, 2019 4:14 am
Will GP5000 TL in 28's fit my sprint?
Disc or Rim brake? Im running 25C on wide HED rims that end up measuring about ~28mm on my rim brake Sprint. Depending on how much they baloon out, I think you'll probably be safe with 28s.
Rim brake.
I have the tyres, but am a little worried. I'll get them mounted this week.
-
RSlone
- Posts: 1
- Joined: Sun Jan 27, 2019 7:23 am
by RSlone on Sun Feb 17, 2019 6:40 pm
Hey guys quick question. 56 vs 58. Looking at rim brake frameset.
182 cm tall with long inseam of 85.75cm
I run my saddle height at around 79cm
I’m concerned about the stock seatpost being high enough on a 56. Does it have a setback too? Thanks in advance.
-
jasonbrim
- Posts: 10
- Joined: Sun Jul 08, 2018 7:30 pm
by jasonbrim on Sun Feb 17, 2019 9:25 pm
Sock3t wrote: ↑Mon Feb 11, 2019 4:14 am
Will GP5000 TL in 28's fit my sprint?
I have the 28 mm clinchers (not tubeless), and they fit fine on my Roval CLX 50/64 (50 front, 64 rear). Look absolutely huge (measure about 29 mm), but there's loads of spare room.
I can't see that the tubeless ones will be much different, and the CLXs are pretty wide rims.
-
jasonbrim
- Posts: 10
- Joined: Sun Jul 08, 2018 7:30 pm
by jasonbrim on Sun Feb 17, 2019 9:26 pm
RSlone wrote: ↑Sun Feb 17, 2019 6:40 pm
Hey guys quick question. 56 vs 58. Looking at rim brake frameset.
182 cm tall with long inseam of 85.75cm
I run my saddle height at around 79cm
I’m concerned about the stock seatpost being high enough on a 56. Does it have a setback too? Thanks in advance.
I have a 54 cm frame, 182 cm with and inseam of 82 cm. Stock seatpost is long enough with my saddle height of 77 cm (more than 2 cm left too). So a 56 should be big enough.
-
IrrelevantD
- Posts: 857
- Joined: Sun Nov 29, 2015 5:47 pm
- Location: Near DFW Airport
by IrrelevantD on Thu Feb 21, 2019 12:58 am
raggi wrote: ↑Wed Feb 20, 2019 2:22 pm
Anyone know if the 2019 framesets are compatible with internal di2 routing?
I took a look at one of the Disc ones at the shop. It is pre-drilled for Di2. From what I've heard/seen, the rim brake version is unchanged, but I haven't seen one in person.
* There is a 70% chance that what you have just read has a peppering of cynicism or sarcasm and generally should not be taken seriously.
I'll leave it up to you to figure out the other 30%. If you are in any way offended, that's on you.
-
raggi
- Posts: 92
- Joined: Thu Mar 02, 2017 2:43 pm
by raggi on Thu Feb 21, 2019 10:33 am
IrrelevantD wrote: ↑Thu Feb 21, 2019 12:58 am
I took a look at one of the Disc ones at the shop. It is pre-drilled for Di2. From what I've heard/seen, the rim brake version is unchanged, but I haven't seen one in person.
Ahh crap, I see, thanks for the info. Ill be getting a rim brake frame, can anyone confirm about the non-existing internal routing on them? If so Ill probably just go for a mech groupset.
-
raggi
- Posts: 92
- Joined: Thu Mar 02, 2017 2:43 pm
by raggi on Thu Feb 21, 2019 11:27 am
Sent a message to Specialized and asked them;
"Thank you for contacting Specialized!
The answer of your question is both yes and no.
First production, (pre september 2018) is not compatible with DI2 routing.
Production from september 2018 is compatible with Di2 routing, (added internal cable routing ports)"
I specifically mentioned the rim brake framsets in the question, so I can only assume the newer batch of those has the routing.. Time to contact my dealer and try to figure out which one I'll be getting.
