201x Specialized Allez Sprint DSW and Gen2
Moderator: robbosmans
-
- Posts: 11
- Joined: Sat Apr 02, 2022 12:34 am
Here is the link to my file for the headset cap to transition from the round headset to the SL7 stem spacers on the 2022 Allez Sprint. Again, it's got room for improvement, but it's close enough for me, and after 80 miles of riding over crappy rust belt roads, I took everything apart and saw no damage or deformation.
https://www.printables.com/model/171982 ... pacersstem
Like I said, I have no intentions to sell/ship any of these but if you want one there are services online that can print it for you and there is a good chance you have some options available locally.
https://www.printables.com/model/171982 ... pacersstem
Like I said, I have no intentions to sell/ship any of these but if you want one there are services online that can print it for you and there is a good chance you have some options available locally.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
-
- Posts: 13
- Joined: Sun Oct 13, 2019 5:54 pm
Appreciate it! Between this, finding a tarmac stem cable clamp, SL7 spacers, and SL7 top cap cover should all really clean up the integrated look.CoastTheMost wrote: ↑Tue Apr 19, 2022 5:32 pmHere is the link to my file for the headset cap to transition from the round headset to the SL7 stem spacers on the 2022 Allez Sprint. Again, it's got room for improvement, but it's close enough for me, and after 80 miles of riding over crappy rust belt roads, I took everything apart and saw no damage or deformation.
https://www.printables.com/model/171982 ... pacersstem
Like I said, I have no intentions to sell/ship any of these but if you want one there are services online that can print it for you and there is a good chance you have some options available locally.
-
- Posts: 11
- Joined: Sat Apr 02, 2022 12:34 am
I made a print for the cable clamp too since it was going to cost me $20 to order one.speedylumberjack wrote: ↑Tue Apr 19, 2022 9:59 pmAppreciate it! Between this, finding a tarmac stem cable clamp, SL7 spacers, and SL7 top cap cover should all really clean up the integrated look.
https://www.printables.com/model/174588 ... able-clamp
It's pretty tight though so it's not the best solution. I'm not sure how tight it is on the OEM version.
The SL7/Venge headset cap is impossible to find online. You could maybe order one through a dealer (no idea what the part number is).
For now at least I ordered the "ONIPAX Lightweight Headset Top Cap" from Amazon and clipped the attachment clips on the top of the cover. I used velcro to keep it on but I just took it off to think of alternate ideas.
Thank You very much for posting this. I'm building my bike up slowly and really want that clean look.CoastTheMost wrote: ↑Tue Apr 19, 2022 5:32 pmHere is the link to my file for the headset cap to transition from the round headset to the SL7 stem spacers on the 2022 Allez Sprint. Again, it's got room for improvement, but it's close enough for me, and after 80 miles of riding over crappy rust belt roads, I took everything apart and saw no damage or deformation.
https://www.printables.com/model/171982 ... pacersstem
Like I said, I have no intentions to sell/ship any of these but if you want one there are services online that can print it for you and there is a good chance you have some options available locally.
I transferred the file to a printing service.
-
- Posts: 20
- Joined: Mon Oct 08, 2018 1:44 am
Awesome. Thank you.CoastTheMost wrote: ↑Tue Apr 19, 2022 10:30 pmI made a print for the cable clamp too since it was going to cost me $20 to order one.speedylumberjack wrote: ↑Tue Apr 19, 2022 9:59 pmAppreciate it! Between this, finding a tarmac stem cable clamp, SL7 spacers, and SL7 top cap cover should all really clean up the integrated look.
https://www.printables.com/model/174588 ... able-clamp
It's pretty tight though so it's not the best solution. I'm not sure how tight it is on the OEM version.
The SL7/Venge headset cap is impossible to find online. You could maybe order one through a dealer (no idea what the part number is).
For now at least I ordered the "ONIPAX Lightweight Headset Top Cap" from Amazon and clipped the attachment clips on the top of the cover. I used velcro to keep it on but I just took it off to think of alternate ideas.
As for the topcap bolt, I believe the part # is S182500012
The stem clamp is part #S204800003
Excellent wrap!wolflikeme wrote: ↑Thu Mar 24, 2022 2:32 pmWith SL7 stem, think I saw a build with a Venge stem as well. Much cleaner looking.
-
- Posts: 15
- Joined: Mon Oct 22, 2012 8:34 am
anyone running mechanical groupset on the latest allez sprint? would like to get your feedback on shifting as if if there is any issue with the routing/shifting? Thank you.
-
- Posts: 15
- Joined: Mon Oct 22, 2012 8:34 am
Hi, may I know how is the shifting with the mechanical groups on this frame? Thanks!
Mechanical shifting is fine, same as it was with my CAAD10. Also, I heard back from Spec “rider care team” and the giant BB holes are supposed to be there, and there are NO covers.roborovski007 wrote:anyone running mechanical groupset on the latest allez sprint? would like to get your feedback on shifting as if if there is any issue with the routing/shifting? Thank you.
Sent from my iPhone using Tapatalk
I can't recall seeing it elsewhere apart from some old steel bikes. If it were such a great idea surely it would be common place in the current era? And if not, surely cause for celebration that Specialised have bestowed this amazing drainage feature on this model only!
Pardon my cynicism, but methinks in all likelihood it was a last ditch effort to shave literal grams off an overweight frame in one of the few places they could get away with it.
Pardon my cynicism, but methinks in all likelihood it was a last ditch effort to shave literal grams off an overweight frame in one of the few places they could get away with it.
I remember watching a specialized university instructional video or maybe GCperformance where they state that the holes at the bottom are to make mechanical routing easier.
Anywho, here's my allez finally built up. Def is heavier than my S-Works SL7 but I don't have scale. Not too worried about bike weights since my legs ultimately need to show up and right now, my bikes do more talking than my legs.
Anywho, here's my allez finally built up. Def is heavier than my S-Works SL7 but I don't have scale. Not too worried about bike weights since my legs ultimately need to show up and right now, my bikes do more talking than my legs.
More pics of that frame please. Same one I have on order, but looks much more silver in your photo...
SL8 S-Works Project Black - 6.29kg
IG: RhinosWorkshop
IG: RhinosWorkshop
This is super cool, thanks for posting.CoastTheMost wrote:Here is the link to my file for the headset cap to transition from the round headset to the SL7 stem spacers on the 2022 Allez Sprint. Again, it's got room for improvement, but it's close enough for me, and after 80 miles of riding over crappy rust belt roads, I took everything apart and saw no damage or deformation.
https://www.printables.com/model/171982 ... pacersstem
Like I said, I have no intentions to sell/ship any of these but if you want one there are services online that can print it for you and there is a good chance you have some options available locally.
I’m a total noob at 3D printing, can anyone recommend a company to print this for me? What material would you recommend?
Thanks for the help.
Sent from my iPad using Tapatalk
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
-
- Posts: 20
- Joined: Mon Oct 08, 2018 1:44 am
Same. I uploaded the two .stl files to shapeways and chose the color/material. Was easy. Still havent received it. But I assume it will be good. Cost me $33 for the clamp and the headset cap.johnsogr wrote: ↑Fri Apr 22, 2022 12:10 pmThis is super cool, thanks for posting.CoastTheMost wrote:Here is the link to my file for the headset cap to transition from the round headset to the SL7 stem spacers on the 2022 Allez Sprint. Again, it's got room for improvement, but it's close enough for me, and after 80 miles of riding over crappy rust belt roads, I took everything apart and saw no damage or deformation.
https://www.printables.com/model/171982 ... pacersstem
Like I said, I have no intentions to sell/ship any of these but if you want one there are services online that can print it for you and there is a good chance you have some options available locally.
I’m a total noob at 3D printing, can anyone recommend a company to print this for me? What material would you recommend?
Thanks for the help.
Sent from my iPad using Tapatalk