DIY Di2 sprint shifters
Moderator: robbosmans
@AndrewL, if you have a Garmin 510, 810 or 1000 (or some of the newer watches), then if you are going to upgrade then I can really recommend the DA9070 brifters since they could then also remote control your Garmin if you also have the D-fly wireless unit. Its a great feature to have!
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Yes the D-Fly works with 6870/6770, but the remote buttons on the top of the shifters only exist on the 9070s, which is one of the coolest features of D-Fly integration in my opinion.
I've actually gotten somewhat addicted to being able to page using them. The paging also serves as a one click way to exit the configuration menus, that I use at the beginning of the ride to calibrate my power meter.
You get 4 options to program. Short and long press for each side.
I've actually gotten somewhat addicted to being able to page using them. The paging also serves as a one click way to exit the configuration menus, that I use at the beginning of the ride to calibrate my power meter.
You get 4 options to program. Short and long press for each side.
- eliflap-scalpel
- Posts: 870
- Joined: Sun May 25, 2008 10:12 pm
- Location: italy
- Contact:
a question:
connecting the sprinter shifters directly to the junction under the stem, does the shifting function work ?
without the Shimano shifters, I mean.
connecting the sprinter shifters directly to the junction under the stem, does the shifting function work ?
without the Shimano shifters, I mean.
http://eliflap.it/
The spint shifters or other momentary switches need to plug into the dedicated port on the 6870 or 9070 shifters. the controller that operates them I believe is tied into that specific port which is why the port is keyed.
- eliflap-scalpel
- Posts: 870
- Joined: Sun May 25, 2008 10:12 pm
- Location: italy
- Contact:
thanks rmerka , for the presence of the PCB .... but someone had tried to plug ?
http://eliflap.it/
-
- Posts: 14
- Joined: Thu Jun 11, 2015 3:09 pm
Hi guys, I got the diy sprint shifters to work but they only shift down. I like them to shift up more for climbing on the tops. Am I doing something wrong and only the bottom port on the right shifter works 9070. Thanks
Sent from my 2014817 using Tapatalk 2
Sent from my 2014817 using Tapatalk 2
grouk wrote:i use that setup a year a go, first i use a normal switch buy at local eletronic shop, first time in the rain start failure
then i buy a better switchs and i put it inside a round plastic piece, like that i can put tape above the switch, with the tape it becomes waterproof.
for the climbing switchs i use a flat membrane switch,now my setup is perfect and i love it
Where did you get those membrane switches from?
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com