Shimano DA TT Bar End Shifters

Discuss light weight issues concerning road bikes & parts.
Post Reply
Posts: 12
Joined: Tue Jul 14, 2009 5:41 pm

by trysixty

just finished putting together swift carbon neurogen TT bike with shimano da 7900 (16.4 lbs)

is there anyway of adjusting the bar end shifter such that when riding in 11 or 12 rear gear, the bar end does NOT point straight down to the ground..........but points straight out??? I've screwed around long enough with the internals, need some expert advice. thanks

by Weenie

Posts: 228
Joined: Sat Sep 22, 2012 2:22 pm

by mitchgixer6

I've not got any experience of messing with the internal parts of these shifters. But previous experience of both DA and Sram TT shifters is that this is just how they work. If you require the shifters to be level with the ground I think the easiest option would be the Sram return to centre shifters. Or indeed an electronic setup.

Posts: 244
Joined: Sun Dec 19, 2010 4:24 am
Location: Ann Arbor, Michigan

by Stefano

Zipp makes a shimano compatible R2C shifter.

User avatar
legs 11
Posts: 3657
Joined: Tue Jan 23, 2007 11:22 am
Location: Leg hurty

by legs 11

In the lever requires the whole range of movement to cover the gear range.
You could invert them so the lever is pointing up and slightly backwards, that's about it.
Pedalling Law Student.

Post Reply
  • Similar Topics
    Last post