SRAM Red 2013 with older cranks

Discuss light weight issues concerning road bikes & parts.
Post Reply
Peter_E
Posts: 409
Joined: Sun Jul 22, 2007 1:39 pm

by Peter_E

Hi, I have SRAM red cranks w Stronglight CT2 rings (50/39) on my bike. Rest of the group is Campagnolo 10 Speed. It works great bit the campy stuff is getting a bit old. Considering getting some used 10 speed SRAM red stift next year. Will teh group from 2013 w yaw derailleur sork with those cranks? I seem to recall something about different spacing of the rings on 2013 cranks?

Skickat från min Nexus 7 via Tapatalk 2

User avatar
Frankie - B
Administrator
Posts: 6611
Joined: Mon Jun 02, 2003 8:17 am
Location: Drenthe, Holland

by Frankie - B

I use it myself, works fine.
'Tape was made to wrap your GF's gifts, NOT hold a freakin tire on.'

User avatar
madcow
Shop Owner
Posts: 3741
Joined: Sun Feb 06, 2005 4:22 pm
Location: Tucson, Az.
Contact:

by madcow

I'm using the Red22 stuff with a pair of EE prototypes which were built for 10 speed Shimano and it works really well.

User avatar
CharlesM
Posts: 5771
Joined: Tue Sep 26, 2006 12:37 am
Location: Phoenix Arizona

by CharlesM

The 2012 / 13 front Der works really well.

That said, if by "older" you mean 2011 Red or older, the chain rings will not be as high quality as 2012-13 (and or Praxis in the case that's what is on the EE).

Pre 2012 will work, but chain pick up has a little lag.

kbzoo
Posts: 29
Joined: Mon Oct 11, 2010 3:47 pm

by kbzoo

I'm using the 2013 Red with a Zipp Vuma Quad crank and it works fine.

Peter_E
Posts: 409
Joined: Sun Jul 22, 2007 1:39 pm

by Peter_E

Thanks guys.

Skickat från min MT15i via Tapatalk 2

fogflip
Posts: 43
Joined: Sat Aug 18, 2012 7:45 pm

by fogflip

Should work you can get some yaw rings for your old crank set I did that with my Quarq elsa...

Post Reply
  • Similar Topics
    Replies
    Views
    Last post