Stem Slamming

Discuss light weight issues concerning road bikes & parts.
User avatar
trychle
Posts: 240
Joined: Thu Nov 29, 2012 12:36 pm
Location: The Netherlands
Contact:

by trychle

I've found that the latter of those two is very, very comfortable. It does look odd, tough.

User avatar
Tinea Pedis
Posts: 8445
Joined: Sat Mar 14, 2009 6:08 am
Location: Geelong
Contact:

by Tinea Pedis

Depends on bike size, top tube slope, saddle height, etc...


But really, compromising fit for the sake of aesthetics is ridiculous.

by Weenie


nathanong87
Resident master of GIF
Posts: 3180
Joined: Mon Jul 18, 2011 2:44 am
Contact:

by nathanong87

SalsaLover wrote:curious to know what you guys find better ?

Non-slammed -17° stem with 2 cm spacers and classic round handlebars ( so it has real ramps )

or

a slammed 6° ( or even -6° ) stem with compact bars and shifter hoods pointing to the sky


well just on the 'fit' alone of those two options, option 1 will be MUCH lower than option2.

-17 and compact or -6 and classic bend would be what you'd consider if you have your fit down.

but just on aesthetics, -17 and classic would be king of dope.

User avatar
btompkins0112
Posts: 2693
Joined: Fri Feb 11, 2011 3:04 am
Location: Mississippi

by btompkins0112

I think TT dictates.....a compact geo frame looks best with a -6 and a horizontal TT looks best with a -17.


Sent from my iPhone using Tapatalk 2

eric
Posts: 2196
Joined: Tue Nov 11, 2003 9:47 pm
Location: Santa Cruz, California, USA
Contact:

by eric

For comfort I prefer the bars to be level from the top to the top of the hoods. Classic bars with 'ramps' down to the hoods don't let you rest the heels of your hands on the bars and reduce the number of comfortable hand positions on the hoods. If the levers are aimed too far up the reach to the brake lever from the drops is to great and leverage on the brake lever from the hoods is reduced. It may be my motorcycling background or the fact that I do a lot of technical descents but I want my brake levers set just right.

I prefer compact bars. Set up with the drops in the same position, the tops and hoods are lower and farther out than they would be with deeper and longer bars. So one's body position when using the tops or hoods is lower.

I don't care about the stem angle. But the fewer spacers the stiffer and lighter. So a stem with no spacers and +6 is better than a stem with spacers and -17.

Post Reply
  • Similar Topics
    Replies
    Views
    Last post