Page 1 of 1

BB30 Compatibility

Posted: Thu May 30, 2013 9:18 pm
by therouler
hi,
i have a lapierre 9it's a 2012 Xelius) that currently has a SRAM S900 crankset in the press-fit BB. i would like to use this on a new cannondale supersix that has a BB30. can i use this crankset and if not what adapter or BB do i need to get to make it compatible? thanks.

BB30 Compatibility

Posted: Thu May 30, 2013 9:18 pm
by Weenie

Posted: Thu May 30, 2013 9:32 pm
by thisisatest
It is directly compatible. You will need a bb30 bearing kit for the other bike (bearings, shields, circlips), and then it drops in.

Sent from my EVO using Tapatalk 4 Beta

Re:

Posted: Thu May 30, 2013 9:46 pm
by therouler
thisisatest wrote:It is directly compatible. You will need a bb30 bearing kit for the other bike (bearings, shields, circlips), and then it drops in.

Sent from my EVO using Tapatalk 4 Beta


hi,
thanks! appreciate the help.

Re:

Posted: Fri May 31, 2013 12:09 am
by deek
thisisatest wrote:It is directly compatible. You will need a bb30 bearing kit for the other bike (bearings, shields, circlips), and then it drops in.

Sent from my EVO using Tapatalk 4 Beta

Are you sure? I'm not familiar with the bike after looking online it looks like it's a BSA frame. It would still work on the Supersix, you would just need some sort of adapter like the Wheels Manufacturing BB30 to SRAM adapters.

Edit: Do you have crank bolts on both cranks or just the non-drive side crank?

Posted: Sat Jun 01, 2013 12:11 pm
by thisisatest
Correction: it is especially confusing due to you having an S900 crankset, which I THOUGHT only came with a 30mm spindle. It apparently was also available with a GXP fitment. It will still fit in a Cannondale bb30 frame, you will instead need the bb30 bearings plus a WheelsMfg bb30-to-GXP ADAPTER.

Sent from my EVO using Tapatalk 4 Beta