Page 1 of 1

Re: Pro Vibe 7s or UD carbon?

Posted: Wed Feb 27, 2013 8:31 pm
by Krackor
I have been using the alu version for about 2 years now. I have never felt my stem to have any undesirable flex. I am 170 lbs and a "sprinter" in cat-4.

I would recommend making your decision based on weight and price rather than stem stiffness.

Re: Pro Vibe 7s or UD carbon?

Posted: Wed Feb 27, 2013 8:31 pm
by Weenie

Re: Pro Vibe 7s or UD carbon?

Posted: Thu Feb 28, 2013 3:51 pm
by Briscoelab
If it's only $30 more, I'd get the carbon... just for the bling factor.

Both are very stiff and the weight is basically the same.

Re: Pro Vibe 7s or UD carbon?

Posted: Thu Feb 28, 2013 6:16 pm
by veloflyte
Carbon fiber is not the best material for every application. A stem is a good example of an application where carbon fiber is not ideal. Stems go through a great deal of stress and they are rather small in shape. Metal has always been a better choice as the appropriate material for a stem. Don't misunderstand me...carbon fiber stems work just fine. But carbon is better suited to larger items....that way the incurred stress can be distributed across a larger area and a larger number of carbon strands. It's really all about the resin of course.....the carbon fibers themselves can withstand a great deal of tension.
Addressing your specific question, it would not surprise me at all if the aluminum stem was stiffer than the carbon stem. But as other responses have noted, there's probably not enough difference between the two for you to notice. So the best advice is that you simply buy the one that looks best.

Re: Pro Vibe 7s or UD carbon?

Posted: Fri Mar 01, 2013 1:55 am
by lannes
Not sure is you can still get this, but this stem has double the stiffness of the Pro vibe carbon stem.

http://www.pro-bikegear.com/publish/con ... _mark.html

Re: Pro Vibe 7s or UD carbon?

Posted: Sun Mar 03, 2013 2:08 am
by Geoff
The alloy Vibe 7s is really stiff. I would recommend an alloy bar, too.