veloplugs with boyd wheels?
Moderator: robbosmans
Anyone happen to know if veloplugs (red or yellow) will fit a set of Boyd Vitesse 30mm aluminum clnchers?
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
- btompkins0112
- Posts: 2635
- Joined: Fri Feb 11, 2011 3:04 am
- Location: Mississippi
Aren't those just XR300's?
If they are, I think they take the yellow ones.
EDIT: if they are XR300's they are the red ones.
If they are, I think they take the yellow ones.
EDIT: if they are XR300's they are the red ones.
Last edited by btompkins0112 on Mon Jan 14, 2013 3:12 am, edited 1 time in total.
Mosaic RS-1
http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=138478
Cielo by Chris King Cross Racer
http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=134376
http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=138478
Cielo by Chris King Cross Racer
http://weightweenies.starbike.com/forum/viewtopic.php?f=10&t=134376
Hi,
From memory, the yellow ones are 8mm while the red ones are a tad bit wider coming in at 8,3 mm if that helps.
If you don't want to contact the manufacturer just use a calliper and measure the diameter of the holes.
Ciao,
From memory, the yellow ones are 8mm while the red ones are a tad bit wider coming in at 8,3 mm if that helps.
If you don't want to contact the manufacturer just use a calliper and measure the diameter of the holes.
Ciao,
Being a snob is an expensive hobby.
fdegrove, it is actually the opposite, as the red ones are smaller than the yellows.