Shimano chain connecting pins. 7801/7900 compatible?

Discuss light weight issues concerning road bikes & parts.
Post Reply
WeightySteve
Posts: 293
Joined: Wed Jun 09, 2010 10:44 am

by WeightySteve

There's a bit of a discussion about it in here somewhere:-

viewtopic.php?f=3&t=84060&start=30&hilit=chain+connecting+pin

But that basically answers the opposite of what I want to be sure about. (In there, people say 7800 chains cannot be joined with 7801 links)

My latest 7901 chain arrived with no pins, fortunately I had 1 (and only 1) spare from the previous chain, so i've used it up.

Just bought a pack of 5 spares ("Chain Connecting Pin - for 10 Speed, CN7801/CN-6600"). Are these identical to 7901 pins?

I don't mind wasting the cash I've spent, I do mind a snapped chain mid sprint!! Just want to be sure.

BdaGhisallo
Posts: 1888
Joined: Wed Mar 17, 2004 1:38 pm

by BdaGhisallo

Get yourself a Connex link to connect your chain. It's easy, allows you to easily take it off for cleaning and you won't have to worry about pin compatibility. I have been using them with 7800/7801/7900/7901 chains for the better part of 8 years and have never had a problem.

Gregorio
Posts: 1582
Joined: Thu Jul 26, 2007 10:24 pm
Location: Center of the Universe

by Gregorio

I have been using a kmc quick link with no issues on my 10 sp shimano Mtb chain. I know it's not the same as what you were asking but I bet it would work fine.

thisisatest
Shop Owner
Posts: 1980
Joined: Sat Jun 13, 2009 4:02 am
Location: NoVA/DC

by thisisatest

answering the actual question, from the 7801 generation forward, shimano 10sp chain pins have been the same. 7800 pins had one groove, 7801 pins went to three grooves to differentiate. oddly, sometimes you see them with two grooves, but basically it's the same.
this tech doc shows the two groove and three groove ones are interchangeable:
http://techdocs.shimano.com/media/techdocs/content/cycle/SI/Chain/SI_09R0A/SI-09R0A-001-Eng_v1_m56577569830688497.pdf


Post Reply
  • Similar Topics
    Replies
    Views
    Last post