Page 5 of 11

Re: Deda's new stem and handlebar

Posted: Sat Apr 27, 2013 2:05 am
by pje0713
$135 for the stem from wiggle.com

http://www.wiggle.co.uk/deda-superleggero-stem/

Re: Deda's new stem and handlebar

Posted: Sat Apr 27, 2013 2:05 am
by Weenie

Re: Deda's new stem and handlebar

Posted: Sat Apr 27, 2013 2:06 am
by pje0713

Re: Deda's new stem and handlebar

Posted: Sat Apr 27, 2013 2:14 am
by deermatt
the person who answered the question someone asked about the bars on wiggle says the reach is 109, is that true? If so thats so far.

Re: Deda's new stem and handlebar

Posted: Sat Apr 27, 2013 5:52 am
by markyboy

Re: Deda's new stem and handlebar

Posted: Wed May 01, 2013 12:59 am
by irongatsby
Okay guys, here's the verdict.

Image

This is a 110mm stem. The weight fluctuated between 108g and 109g, so it's about 9 to 10 grams more than their claim of 99g. I weighed 3 different examples and they all weighed the same. I'd say that's not bad considering it's Deda. It's also worth noting that the stack height is unusually low at 36mm resulting in a very slender looking stem. I like it!

Re: Deda's new stem and handlebar

Posted: Wed May 01, 2013 7:24 am
by Scoops
Ref the reach. If you look at the deda web site there is a catalogue that can be downloaded. At the back is all the tech stuff including reach.

Reach = 75mm
Drop = 130mm

Not sure where wiggle got their measurement.

Re: Deda's new stem and handlebar

Posted: Wed May 01, 2013 2:48 pm
by Rippin
Hmm...Deda has published conflicting numbers for their Zero100 bars. Website says the drop is 128mm but the catalogue says 145mm. So who really knows the correct reach and drop numbers for the Superleggera...

Deda's new stem and handlebar

Posted: Wed May 01, 2013 4:39 pm
by Kjetil
RHM is 128mm

Re: Deda's new stem and handlebar

Posted: Wed May 01, 2013 4:43 pm
by LionelB
Can someone report on the stiffness of this combo ?

Re: Deda's new stem and handlebar

Posted: Sat May 04, 2013 9:13 am
by fifarafa
LionelB wrote:Can someone report on the stiffness of this combo ?


especially comparing it to ZERO100 SERVIZIO CORSE and ZERO 100 :)

Re: Deda's new stem and handlebar

Posted: Sat May 04, 2013 2:12 pm
by corky
fifarafa wrote:
LionelB wrote:Can someone report on the stiffness of this combo ?


especially comparing it to ZERO100 SERVIZIO CORSE and ZERO 100 :)



The only differance between those 2 stems are Ti bolts and some red paint....

Re: Deda's new stem and handlebar

Posted: Wed May 08, 2013 5:36 am
by pje0713
In 120mm...

Image

Image

Re: Deda's new stem and handlebar

Posted: Fri May 31, 2013 4:58 pm
by CimaCoppi
I got a black on black superleggero yesterday. It's a nice looking stem, much nicer than the zero100.

I forgot to take a pic of it on the scale but can confirm it is 108.5grams at a 110 length.

here it is on the bike anyway:

Image

oh.. and regarding stiffness, I don't notice it to be different than the zero100, but really, if you want a stiff stem just ride a Thomson X2. The 40 grams isn't going to make any difference, none what-so-ever, if all else is equal. The faceplates on the superleggero are very close together though, which has got to either put more stress on them or allow more flex than a zero100 in my opinion.

Re: Deda's new stem and handlebar

Posted: Sat Jun 01, 2013 7:23 am
by TeoTri
Very nice but i don't trust it, too thin!

Re: Deda's new stem and handlebar

Posted: Sat Jun 01, 2013 7:23 am
by Weenie

Re: Deda's new stem and handlebar

Posted: Sun Jun 02, 2013 2:36 am
by carlislegeorge
what is too thin?

TeoTri wrote:Very nice but i don't trust it, too thin!


My 110mm was also between 108-109 grams. Enough difference to make me rethink getting the matching handlebars...

Image

Looks good, though...

Image
Image