Is the English/Italian bearing cardridge/axle assembly of Campy 102 square taper BB's the same?
By that I mean can either cartridge bearing/axle assembly be used interchangably with only the appropriate 68 or 70 mm cups changed out?
Thanks -- Rick
Campy 102 square taper BB compatability question
Moderator: robbosmans
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Hi,
Take any Campa 102mm axle, if you have the cups that fit the standard of your frame's BB shell then it will fit.
For example, imagine you have a BSC standard BB axle and frame but the bearings are shot. You have a new one lying about that's conform to the ITA standard.
By simply swapping the cups around you now have a perfectly fine BSC BB again.
And vice versa form BSC to ITA.
Just be careful not to damage the bearings of the new BB as that's very easily done.
Ciao,
P.S Note also that the bearings can be replaced. Regardless of what Campa says....
Take any Campa 102mm axle, if you have the cups that fit the standard of your frame's BB shell then it will fit.
For example, imagine you have a BSC standard BB axle and frame but the bearings are shot. You have a new one lying about that's conform to the ITA standard.
By simply swapping the cups around you now have a perfectly fine BSC BB again.
And vice versa form BSC to ITA.
Just be careful not to damage the bearings of the new BB as that's very easily done.
Ciao,
P.S Note also that the bearings can be replaced. Regardless of what Campa says....
Being a snob is an expensive hobby.
Thanks for the info.
I have an old Serotta Colorado II I want to reassemble but all I have on hand are Italian threaded square taper BB's.
As I have a few Record old style square taper cranks I didn't really want to purchase external cups and Ultra Torque for the occasion even though I use that combination on another bike and really like them.
I have an old Serotta Colorado II I want to reassemble but all I have on hand are Italian threaded square taper BB's.
As I have a few Record old style square taper cranks I didn't really want to purchase external cups and Ultra Torque for the occasion even though I use that combination on another bike and really like them.